Template:Brace/doc

This template inserts a "brace segment": part of a brace (curly bracket) that can be put into a table to span multiple items.

Usage

 * Parameter 1 determines the orientation of the brace: l (left - { ), r (right - } ), o (over - ⏞ ) or u (under - ⏟⏟ ).
 * Parameter 2 determines the part of the brace:
 * t: top end:
 * b: bottom end:
 * m: middle (for braces with odd number of sections):
 * mt: middle, top (for braces with even numbers of segments):
 * mb: middle, bottom (for braces with even numbers of segments):
 * s: span (between middle and end):
 * ht: half-brace top (for 2-segment braces)
 * hb: half-brace bottom (for 2-segment braces)
 * l: left end:
 * r: right end:
 * ml: middle, left (for braces with even numbers of segments):
 * mr: middle, right (for braces with even numbers of segments):
 * hl: half-brace left (for 2-segment braces)
 * hr: half-brace right (for 2-segment braces)


 * Parameter 3 is an optional width for the segment tiles (default is 25) in pixels. All tiles in one brace must be the same for alignment.


 * Note that the table needs to have zero padding and cell spacing. The template brace table parameters will set these for you.


 * In the case of horizontal (under and over) brace, left is the "top" and right the "bottom"