Page:Works of Jules Verne - Parke - Vol 6.djvu/232

 then in use, its beam moved with extreme power would serve to stretch out the wire by rolling it round itself. It was a delicate operation, and required much care. The iron, prepared previously in long thin rods, the ends of which were sharpened with the file, having been introduced into the largest hole of the draw-plate, was drawn out by the beam which wound it round itself, to a length of twenty-five or thirty feet, then unrolled, and the same operation was performed successively through the holes of a less size. Finally, the engineer obtained wires from forty to fifty feet long, which could be easily fastened together and stretched over the distance of five miles, which separated the corral from the bounds of Granite House.

It did not take more than a few days to perform this work, and indeed as soon as the machine had been commenced, Cyrus Harding left his companions to follow the trade of wire-drawers, and occupied himself with manufacturing his battery.

Cyrus Harding, after mature consideration, decided to manufacture a very simple battery, resembling as nearly as possible that invented by Becquerel in 1820, and in which zinc only is employed. The other substances, azotic acid and potash, were all at his disposal.

The way in which the battery was composed was as follows, and the results were to be attained by the reaction of acid and potash on each other. A number of glass bottles were made and filled with azotic acid. The engineer corked them by means of a stopper through which passed a glass tube, bored at its lower extremity, and intended to be plunged into the acid by means of a clay stopper secured by a rag. Into this tube, through its upper extremity, he poured a solution of potash, previously obtained by burning and reducing to ashes various plants and in this way the acid and potash could act on each other through the clay. Cyrus Harding then took two slips of zinc, one of which was plunged into azotic acid, the other into a solution of potash. A current was immediately produced, which was transmitted from the slip of zinc in the bottle to that in the tube, and the two slips having been connected by a metallic wire the slip in the tube became the positive pole, and that in the bottle the negative pole of the apparatus. Each bottle.bottle, [sic] therefore, produced as many currents as united would