Page:Vincent's systems of cutting all kinds of tailor-made garments.djvu/261

 DEFECTS IN SHOULDERS. Crease from Neck Point to Shoulder Bone: —

Straighten, neck, let out shoulder at scye end, and stretch over the region of the shoulder bone, see Diagram 3by.

Crease from Neck Point to Bottom of Scye:—

Straighten and lengthen neck point as Diagram 370. If collar is short lengthen it. If facings are narrow, let them out.

Crease above the Breast Pocket:—

Give more width to welt, or cut pocket mouth through to scye, and pass lower part forward 4 inch, as in Diagram 371.

Tight at neck, loose at Shoulder End:—

Let out neck point, as in Diagram 372; or lengthen collar, or take in at shoulder end and, if necessary, deepen the scye.

Tight on Shoulder, loose Round Neck:—

Let out at scye end of shoulder, as Diagram 3. 3, and, if neceseary let out sleeve: or take in at neck point and shorten collar.

Circular Crease below Front of Scye:—

Deepen and advance scye as Diagram 374, or lengthen shoulder. If facings are tight or twisted, put them right.

Crease from Front of Scye to Hip:—

Let out under arm seam at waist, as Diagram 375.

Circular Crease at Front of Scye:— Advance scye as Diagram 376, or if facings are tight let them out.