Page:United States Statutes at Large Volume 93.djvu/1613

 PROCLAMATION 4707—DEC. 11, 1979 548.47

93 STAT. 1581

Perfume bottles fitted with ground glass stoppers.. {See Annex (60% ad lUi val.j

•

65. Items 546.54 and 546.56 are superseded by:

"

546.60

iArticles...:J {Other...;j {Other...:J Valued over $0.30 but not over $3 each

{30% ad val.j

{60% ad val.]

66. Items 546.58 and 546.59 are superseded by: {Articles...:j {Other...:] {Other...:] {Valued...:] "Cut or engraved: 546.62 Valued over $3 but not over $5 each {15% ad {60% ad val.j val.j 546.64 Valued over $5 each (See Annex {60% ad IIIj val.j Other: 546.66 Valued over $3 but not over $5 each {15% ad {60% ad val.j val.j 546J68 Valued over $5 each {See Annex {60% ad III} val.j

";

";

Schedule 6, Part 1 67. Schedule 6, part 1 is modified by deleting items 601.28 and 602.31^ Schedule 6, Part 2, Subpart B 68. Schedule 6, part 2B, headnote 2(h) is modified by (1) deleting "and" in subparagraph (iii), (2) deleting the period at the end of subparagraph (iv) and substituting a semi-colon in lieu thereof, and {3) adding the following, immediately after subparagraph (iv); "(v) "tool steel" refers to alloy steel which contains the following combinations of elements in the quantity, by weight, respectively indicated: (A) not less than 1.0 percent carbon and over 11.0 percent chromium; or (B) not less than 0.3 percent carbon and 1.25 percent to 11.0 percent inclusive chromium; or (C) not less than 0.85 percent carbon and 1.0 percent to 1.8 percent inclusive manganese; or (D) 0.9 percent to 1.2 percent inclusive chromium and 0.9 percent to 1.4 percent inclusive molybdenum; or (E) not less than 0.5 percent carbon and not less than 3.5 percent molybdenum; or (F) not less than 0.5 percent carbon and not less than 5.5 percent tungsten; (vi) "high speed tool steel" refers to all tool steel which contains by weight, not less than 0.5 percent carbon and not less than 3.5 percent molybdenum; or not less than 0.5 percent carbon and not less than 5.5 percent tungsten; (vii) "tool steel of the type described in headnote 2(h)(vii)" refers to alloy tool steel which contains, in addition to iron, each of the following elements by weight in the amounts specified: carbon: not less than 0.95 nor more than 1.13 percent; manganese: not less than 0.22 nor more than 0.48 percent; sulfur: none, or not more than 0.03 percent; phosphorus: none, or not more than 0.03 percent; silicon: not less than 0.18 nor more than 0.37 percent; chromium: not less than 1.25 nor more than 1.65 percent; nickel: none, or not more than 0.28 percent; copper: none, or not more than 0.38 percent; molybdenum: none, or not more than 0.09 percent; [ ' This rate reflects the modification of a column 2 rate of duty pursuant to the Trade Agreements Act of 1979, Sec. 514.]

�