Page:United States Statutes at Large Volume 89.djvu/985

 PUBLIC LAW 94-163—DEC. 22, 1975

89 STAT. 925

benefits of reduced energy consumption, and the savings in operating costs throughout the estimated average life of the covered product, outweigh— (i) any increase to purchasers in initial charges for, or maintenance expenses of, the covered product which is likely to result from the imposition of the standard, (ii) any lessening of the utility or the performance of the covered product, and (iii) any negative effects on competition. (E) For purposes of subparagraph (D)(iii), the Administrator shall not determine that there are any negative effects on competition, unless the Attorney General (on request of the Administrator, the Commission, or any person, or on his own motion^ makes such determination and submits it in writing to the Administrator, together with his analysis of the nature and extent of such negative effects. The determination of the Attorney General shall be available for public inspection. (5) The Administrator may (without regard to paragraphs (1) through (4)(B)) commence a proceeding to prescribe an energy efficiency standard applicable to any type or class of covered product (other than a consumer product classified as a covered product under section 322(b)). In such proceeding he may prescribe such a standard if he makes the determinations specified in clauses (i) and (ii) of paragraph (4)(C) of this subsection. (b) Any energy efficiency standard shall be prescribed in accord- Publication in ance with the following procedure: Federal Register. (1) The Administrator shall (A) publish an advance notice of proposed rulemaking which specifies (i) the type or class of covered products to which the rule will apply, and (ii) the energy efficiency level which the Administrator proposes to require by such energy efficiency standard, and (B) invite interested persons to submit, within 90 days after the date of publication of such advance notice— (i) written or oral presentations of data, views, and argument as to the proposed level of energy efficiency, and (ii) a proposed energy efficiency standard applicable to such type or class of covered product. (2) A proposed rule which prescribes an energy efficiency standard for a type or class of covered products may not be prescribed earlier than 120 days after the date of publication of advance notice of proposed rulemaking for such type or class. (3) A rule prescribing an energy efficiency standard for a class or type of covered product may not be published earlier than 60 days after the date of publication of the proposed rule under this section for such type or class. Such rule shall take effect not earlier than 180 days after the date of its publication in the Federal Register, Such rule (or any amendment thereto) shall not apply to any covered product the manufacture of which was completed prior to the effective date of the rule or amendment as the case may be. (c) An energy efficiency standard prescribed under this section shall include test procedures prescribed in accordance with section 323, and may include any requirement which the Administrator determines is necessary to assure that each covered product to which such standard applies meets the required minimum level of energy efficiency specified in such standard. (d) A rule with respect to any type or class of covered product prescribed under this section may not take effect unless a rule under section 324 with respect to such type or class of covered product has

�