Page:United States Statutes at Large Volume 77A.djvu/406

 TARIFF SCHEDULES OF THE UNITED STATES T A R I F F SCHEDULES OF THE UNITED STATES

SCHEDULE 7, 392

SPECIFIED PRODUCTS; MISCELLANEOUS AND NONENUMERATED PRODUCTS Part 12. - Rubber and Plastics Products Rates of Duty

770.30 770. ^tO 770.45 770.70 770.80

Expanded, foamed, or sponge rubber or plastics, and articles not specially provided for wholly or almost wholly of such rubber or plastics: Not flexible Flexible: Of polyurethane Of cellulose Of natural rubber Other

Subpart B. - Rubber and Plastics Waste and Scrap; Rubber and Plastics Film, Strips, Sheets, Plates, Slabs, Blocks, Filaments, Rods, Tubing and Other Profile Shapes Subpart B headnotes: 1. This subpart covers rubber or plastics products (other than waste or scrap) In the following forms: (a) blocks and slabs In bulk forms; (b) film, strips, sheets, and plates, all the foregoing (whether or not printed, embossed, polished, or otherwise surface-processed) made or cut Into rectangular pieces over 21 Inches In width and over 51 Inches In length; and (c) filaments, rods, seamless tubing, and profile shapes, all the foregoing whether or not polished or otherwise surface processed, or cut Into lengths which are over 15 Inches. 2.

This subpart does not cover — (I) printed matter provided for In part 5 of schedule 2; (II) man-made fibers, as defined In part IE of schedule 3; (III) articles provided for In subpart A of this part; (Iv) film, strips, sheets, and plates, which — (A) have been made or cut Into non-rectangular shapes of any size, or (B) measure not over 21 Inches In width, or (C) measure not over 51 Inches In length, or ID) have been ground on the edges, drilled, milled, hemmed, or otherwise processed (except surfaceprocessed); or (v) filaments, rods, seamless tubing, and profile shapes, which have been made or cut Into lengths measuring not over 15 inches, or which have been ground on the ends, drilled, milled, or otherwise processed (except surface-processed), The products described In (Ivl and (v) are classifiable as articles in subpart C of this part or under descriptions elsewhere In the schedules.

17% ad val.

8 0 % ad val.

12.556 ad val. 38% ad val. 12.5S6 ad val. 2556 ad val.

25% 60% 25;^ 50%

ad ad ad ad

val. val. val. val.

�