Page:United States Statutes at Large Volume 124.djvu/1386

 124 STAT. 1360 PUBLIC LAW 111–199—JULY 7, 2010 ‘‘(i) intended for interior use; and ‘‘(ii) composed of (as determined under the standard numbered ANSI/HPVA HP–1–2009) an assembly of layers or plies of veneer, joined by an adhesive with— ‘‘(I) lumber core; ‘‘(II) particleboard core; ‘‘(III) medium-density fiberboard core; ‘‘(IV) hardboard core; or ‘‘(V) any other special core or special back material. ‘‘(B) EXCLUSIONS.—The term ‘hardwood plywood’ does not include— ‘‘(i) military-specified plywood; ‘‘(ii) curved plywood; or ‘‘(iii) any other product specified in— ‘‘(I) the standard entitled ‘Voluntary Product Standard—Structural Plywood’ and numbered PS 1–07; or ‘‘(II) the standard entitled ‘Voluntary Product Standard—Performance Standard for Wood-Based Structural-Use Panels’ and numbered PS 2–04. ‘‘(C) LAMINATED PRODUCTS.— ‘‘(i) RULEMAKING.— ‘‘(I) IN GENERAL.—The Administrator shall conduct a rulemaking process pursuant to sub- section (d) that uses all available and relevant information from State authorities, industry, and other available sources of such information, and analyzes that information to determine, at the discretion of the Administrator, whether the defini- tion of the term ‘hardwood plywood’ should exempt engineered veneer or any laminated product. ‘‘(II) MODIFICATION.—The Administrator may modify any aspect of the definition contained in clause (ii) before including that definition in the regulations promulgated pursuant to subclause (I). ‘‘(ii) LAMINATED PRODUCT.—The term ‘laminated product’ means a product— ‘‘(I) in which a wood veneer is affixed to— ‘‘(aa) a particleboard platform; ‘‘(bb) a medium-density fiberboard plat- form; or ‘‘(cc) a veneer-core platform; and ‘‘(II) that is— ‘‘(aa) a component part; ‘‘(bb) used in the construction or assembly of a finished good; and ‘‘(cc) produced by the manufacturer or fab- ricator of the finished good in which the product is incorporated. ‘‘(4) MANUFACTURED HOME.—The term ‘manufactured home’ has the meaning given the term in section 3280.2 of title 24, Code of Federal Regulations (as in effect on the date of promulgation of regulations pursuant to subsection (d)). ‘‘(5) MEDIUM-DENSITY FIBERBOARD.—The term ‘medium- density fiberboard’ means a panel composed of cellulosic fibers