Page:United States Statutes at Large Volume 119.djvu/646

 119 STAT. 628

Deadline. Requirements.

VerDate 14-DEC-2004

08:19 Oct 26, 2006

PUBLIC LAW 109–58—AUG. 8, 2005

‘‘(11) Test procedures for traffic signal modules and pedestrian modules shall be based on the test method used under the Energy Star program of the Environmental Protection Agency for traffic signal modules, as in effect on the date of enactment of this paragraph. ‘‘(12)(A) Test procedures for medium base compact fluorescent lamps shall be based on the test methods for compact fluorescent lamps used under the August 9, 2001, version of the Energy Star program of the Environmental Protection Agency and the Department of Energy. ‘‘(B) Except as provided in subparagraph (C), medium base compact fluorescent lamps shall meet all test requirements for regulated parameters of section 325(cc). ‘‘(C) Notwithstanding subparagraph (B), if manufacturers document engineering predictions and analysis that support expected attainment of lumen maintenance at 40 percent rated life and lamp lifetime, medium base compact fluorescent lamps may be marketed before completion of the testing of lamp life and lumen maintenance at 40 percent of rated life. ‘‘(13) Test procedures for dehumidifiers shall be based on the test criteria used under the Energy Star Program Requirements for Dehumidifiers developed by the Environmental Protection Agency, as in effect on the date of enactment of this paragraph unless revised by the Secretary pursuant to this section. ‘‘(14) The test procedure for measuring flow rate for commercial prerinse spray valves shall be based on American Society for Testing and Materials Standard F2324, entitled ‘Standard Test Method for Pre-Rinse Spray Valves’. ‘‘(15) The test procedure for refrigerated bottled or canned beverage vending machines shall be based on American National Standards Institute/American Society of Heating, Refrigerating and Air-Conditioning Engineers Standard 32.1–2004, entitled ‘Methods of Testing for Rating Vending Machines for Bottled, Canned or Other Sealed Beverages’. ‘‘(16)(A)(i) Test procedures for ceiling fans shall be based on the ‘Energy Star Testing Facility Guidance Manual: Building a Testing Facility and Performing the Solid State Test Method for ENERGY STAR Qualified Ceiling Fans, Version 1.1’ published by the Environmental Protection Agency. ‘‘(ii) Test procedures for ceiling fan light kits shall be based on the test procedures referenced in the Energy Star specifications for Residential Light Fixtures and Compact Fluorescent Light Bulbs, as in effect on the date of enactment of this paragraph. ‘‘(B) The Secretary may review and revise the test procedures established under subparagraph (A).’’; and (2) by adding at the end the following: ‘‘(f) ADDITIONAL CONSUMER AND COMMERCIAL PRODUCTS.—(1) Not later than 2 years after the date of enactment of this subsection, the Secretary shall prescribe testing requirements for refrigerated bottled or canned beverage vending machines. ‘‘(2) To the maximum extent practicable, the testing requirements prescribed under paragraph (1) shall be based on existing test procedures used in industry.’’. (c) STANDARD SETTING AUTHORITY.—Section 325 of the Energy Policy and Conservation Act (42 U.S.C. 6295) is amended— (1) in subsection (f)(3), by adding at the end the following:

Jkt 039194

PO 00001

Frm 00626

Fmt 6580

Sfmt 6581

E:\PUBLAW\PUBL001.119

APPS06

PsN: PUBL001

�