Page:United States Statutes at Large Volume 116 Part 4.djvu/781

 PROCLAMATION 7529-MAR. 5, 2002 116 STAT. 3209 ANNEX (continued) 20 (B) flarrolled products (provided for in subheading 7225.99.00), containing less than 24 f>ercent by weight of nickel, having a thickness over 0.27 mm but not over 0.33 mm, coated with aluminum, also designated as X-067; and (C) flat-rolled products (provided for in subheading 7212.60.00), in coils, of a thickness from 1.10 mm to 4 90 mm, inclusive; of a width from 76 mm to 250 mm, mclusive; and of the following specified content by weight: carbon under 0.10 percent, manganese under 0.40 percent, phosphorus under 0.04 percent, sulfur under 0.05 percent and silicon under 0.05 percent; the forgoing clad with aluminum having the following specified content by weight: copper under 2.51 percent, tin under 15.10 percent, lead under 2.0 percent, antimony under 0.50 percent, silicon under 3.0 percent and other materials less than 1.25 percent; and also designated as X-107; (xxxix) heat shrinkable (HS) band products designated as X-142, as described below: (A) products known as "21 RS" (suitable for use in 20" CRTs) or "38 RS" (suitable for use in 36" CRTs), the foregoing which are electrogalvanized steel sheet.and coil with the following specifications: tensile strength 45-49 kg/mm-; yield point 33-37 kg/mm-, magnetic properties 450p or more, coating weights of zinc 7 g/m' minimum and chromium 20-60 mg/m-, thickness tolerance ± 5% and chemical composition (in percentage by weight) carbon 0.07 maximum, silicon 2.0 maximum, manganese 2.0 maximum, phosphorus 0.15 maximum and sulfur 0.02 maximum; (B) product known as "42 RS" (suitable for use in 40" CRTs), the foregoing which is electrogalvanized steel sheet and coil with the following specifications: tensile strength 45-49 kg/mm-, yield point 33-37 kg/mm', magnetic properties 450p or more, coating weights of zinc 17 g/m' minimum, special chromate treatment with a thickness of film 0.2 -0.8|Jm, thickness tolerance ± 5 percent, with chemical composition (in percentage by weight) carbon 0.07 maximum, silicon 2.0 maximum, manganese 2.0 maximum, phosphorus 0.15 maximum and sulfur 0.02 maximum and with zinc-nickel alloy electroplating; (C) products known as "34 RS" (suitable for use in 32" CRTs), the foregoing which are high strength electrolytic zinc coated silicon steel sheets and strips with the following specifications: thickness 1.20 mm, thickness tolerance ± 60 pm, width tolerance -0/+7 mm, tensile strength 41-45 kg/mm', yield point 26-30 kg/mm^, magnetic properties of permeability, thickness of 1.20 mm with specifications of p=800, with zinc-nickel alloy electroplating, coating weights of zinc 17-24 g/m' and chromium 40-70 mg/m', chemical treatment 0.5 -1.1 g/m', maximum deviation from horizontal flat surface of 5 mm maximum; with the camber of mother coils not larger than 2 mm per 20O0'mm in length; with chemical composition (in percentage by weight) of carbon 0.005 maximum, silicon 1.0-1.6, manganese 0.6 maximum, phosphorus 0.13 maximum and sulfur 0.03 maximum; (D) products known as "29 RS" (suitable for use in 27" CRTs), the foregoing which are high strength electrolytic zinc coated silicon steel sheets and strips with the following specifications: thickness 1.0 mm, thickness tolerance ± 50 p, width tolerance -0/+7 mm, tensile strength 45-49 kg/mm', yield point 32-36 kg/mm^, magnetic properties of permeability thickness of 1.0 mm, with specification of p=500, zinc-nickel alloy electroplating, coating weights of zinc 17-24 g/m' and chromium 45-75 mg/m', maximum deviation from horizon flat surface of 5 mm maximum, with the camber of mother coils not larger than 2 mm per 2000 mm in length, with chemical composition (in percent by weight) carbon 0.005 maximum, silicon 1.0-1.6, manganese 0.6 maximum, phosphorus 0.15 maximum and sulfur 0.03 maximum; (E) products suitable for use in 32V PF and 36V PF picture tubes, the foregoing which are electrolytic zinc-nickel coated steel known as "NKCA440E" with a chemical composition (in percent by weight) of carbon less than 0.010%, manganese less than 0.6%, phosphorus less than 0.15%, sulfur less than 0.03%, silicon 1.0-1.6% and iron the remainder, with a

�