Page:United States Statutes at Large Volume 108 Part 2.djvu/242

 108 STAT. 958 PUBLIC LAW 103-272—JULY 5, 1994 § 30126. Used motor vehicles To ensure a continuing and effective national safety program, it is the poHcy of the United States Government to encourage and strengthen State inspection of used motor vehicles. Therefore, the Secretary of Transportation shall prescribe uniform motor vehicle safety standards applicable to all used motor vehicles. The standards shall be stated in terms of motor vehicle safety performance. §30127. Automatic occupant crash protection and seat belt use (a) DEFINITIONS. —In this section— (1) "bus" means a motor vehicle with motive power (except a trailer) designed to carry more than 10 individuals. (2) "multipurpose passenger vehicle" means a motor vehicle with motive power (except a trailer), designed to carry not more than 10 individuals, that is constructed either on a truck chassis or with special features for occasional off-road operation. (3) "passenger car" means a motor vehicle with motive power (except a multipurpose passenger vehicle, motorcycle, or trailer) designed to carry not more than 10 individuals. (4) "truck" means a motor vehicle with motive power (except a trailer) designed primarily to transport property or special purpose equipment. (b) INFLATABLE RESTRAINT REQUIREMENTS. — (1) Not later than September 1, 1993, the Secretary of Transportation shall prescribe under this chapter an amendment to Federal Motor Vehicle Safety Standard 208 issued under the National Traffic and Motor Vehicle Safety Act of 1966. The amendment shall require that the automatic occupant crash protection system for both of the front outboard seating positions for each of the following vehicles be an inflatable restraint (with lap and shoulder belts) complying with the occupant protection requirements under section 4.1.2.1 of Standard 208: (A) 95 percent of each manufacturer's annual production of passenger cars manufactured after August 31, 1996, and before September 1, 1997. (B) 80 percent of each manufacturer's annual production of buses, multipurpose passenger vehicles, and trucks (except walk-in van-type trucks and vehicles designed to be sold only to the United States Postal Service) with a gross vehicle weight ^ rating of not more than 8,500 pounds and an unloaded vehicle weight of not more than 5,500 pounds manufactured after August 31, 1997, and before September 1, 1998. (C) 100 percent of each manufacturer's annual production of passenger cars manufactured after August 31, 1997. (D) 100 percent of each manufacturer's annual production of vehicles described in clause (B) of this paragraph manufactured after August 31, 1998. (2) Manufacturers may not use credits and incentives available before September 1, 1998, under the provisions of Standard 208 (as amended by this section) to comply with the requirements of paragraph (1)(D) of this subsection after August 31, 1998. (c) OWNER MANUAL REQUIREMENTS.—In amending Standard 208, the Secretary of Transportation shall require, to be effective as soon as possible after the amendment is prescribed, that owner manuals for passenger cars, buses, multipurpose passenger vehicles.

�