Page:United States Statutes at Large Volume 106 Part 4.djvu/76

 106 STAT. 2812 PUBLIC LAW 102-486—OCT. 24, 1992 1.3 + (0.16 X the minimum cooling EER as specified in subparagraph (A)) (at a standard rating of 47 degrees F db). (4) Each warm air furnace and packaged boiler manufactured on or after January 1, 1994, shall meet the following standard levels: "(A) The minimum thermal efficiency at the maximum rated capacity of gas-fired warm-air furnaces with capacity of 225,000 Btu per hour or more shall be 80 percent. "(B) The minimum thermal efficiency at the maximum rated capacity of oil-fired warm-air furnaces with capacity of 225,000 Btu per hour or more shall be 81 percent. "(C) The minimum combustion efficiency at the maximum rated capacity of gas-fired packaged boilers with capacity of 300,000 Btu per hour or more shall be 80 percent. "(D) The minimum combustion efficiency at the maximum rated capacity of oil-fired packaged boilers with capacity of 300,000 Btu per hour or more shallbe 83 percent. "(5) Each storage water heater, instantaneous water heater, and unfired water storage tank manufactured on or after January 1, 1994, shall meet the following standard levels: "(A) Except as providea in subparagraph (G), the maximum standby loss, in percent per hour, of electric storage water heaters shall be 0.30 + (27/Measured Storage Volume [in gallons]). "(B) Except as provided in subparagraph (G), the maximum standby loss, in percent per hour, of gas- and oil-fired storage water heaters with input ratings of 155,000 Btu per hour or less shall be 1.30 + (114/Measured Storage Volume [in gallons]). The minimum thermal efficiency of such units shall be 78 percent. "(C) Except as provided in subparagraph (G), the maximum standby loss, in percent per hour, of gas- and oil-fired storage water heaters with input ratings of more than 155,000 Btu per hour shall be 1.30 + (95/Measured Storage Volume [in gallons]). The minimum thermal efficiency of such units shall be 78 percent. "(D) The minimum thermal efficienQr of instantaneous water heaters with a storage volume of less than 10 gallons shall be 80 percent. "(E) Except as provided in subparagraph (G), the minimum thermal efficiency of instantaneous water heaters with a storage volume of 10 gallons or more shall be 77 percent. The maximum standby loss, in percent/hour, of such units shall be 2.30 •»- (67/Measured Storage Volume [in gallons]). "(F) Except as provided in subparagraph (G), the maximimi heat loss of unfired hot water storage tanks shall be 6.5 Btu per hour per square foot of tank surface area. "(G) Storage water heaters and hot water storage tanks having more man 140 gallons of storage capacity need not meet the standby loss or heat loss requirements specified in subparagraphs (A) through (C) and subparagraphs (E) and (F) if the tank siuface area is thermally insmated to Rr-12.5 and if a standing pilot Ught is not used. Federal "(6)(A) If ASHRAE/IES Standard 90.1, as in effect on the date ^^^Y: of enactment of the Energy Policy Act of 1992, is amended with pu ica ion. respect to any small commercial package air conditioning and heating equipment, large commercial package air conditioning and heat-

�