Page:UK Traffic Signs Manual - Chapter 8 - Part 1 (Traffic Safety Measures and Signs for Road). Designs 2009.pdf/132



NOTES: 131
 * 1) Where overtaking is permitted in both directions a sign to 7206 should be erected on each approach. In this case all approach signs should be located at D/3 spacing.
 * 2) Where drivers would be required to cross continuous white lines in the lane changeover positions these should be masked or removed.
 * 3) Refer to Table 5.6 in Section D5.11 for the lengths of guide islands.
 * 4) Refer to Table 5.3 in Section D5.4 for the recommended range of distances D and E.
 * 5) Cone spacing will depend on the type of road; see Table A1.3 (Appendix 1).