Page:Title 3 CFR 2002 Compilation.djvu/43

 Proc. 7529 Title 3--The President ANNEX (continued) 10 t'\177x i) hol-rolled products designated as X-046, as described below: (A) products known as "Domex I \1770," not further processed than hot rolled. m thicknesses of between 4.55 and I I.I ram, inclusive, and w\177dths of between 889 and 1600 ram, inclusive; conta\177mng, by weight, carbon of 0.12 percent maximum, sdicon of 0.60 percent maximum, manganese of 2.0 percent maximum, phosphorus of 0.025 percent maxtmum, sulphur of 0.010 percent maximum, aluminum of at least 0.015 percent, columbium of 0.09 percent maremum and titamum of 0.20 percent maximum; exhibiting yield strength of 758 MPa, tensile strength of813 MPa, elongation of 15 percent, bendability of 1.6 to 1.8xt, and \177mpact toughness of 27 J at -40' C (provided for in subheadrag 7208.36.00, 7208.37.00, 7208.38.00, 7208.39.00, 7225.30.30 or 7225.30.70), the foregoing also designated as X-108; or (B) products known as "Domex Wear," not further processed than hot rolled, in thicknesses of between 3.00 and 6.35 ram, inclusive, and w\177dths of between 889 and 1600 mm, inclusive; contaimng, by weight, carbon of0.17 percent typical value (TV), silicon of 0.30 percent TV, manganese of 1.8 percent TV, phosphorus of 0.01 percent TV, sulphur of 0.010 percent maximum, chromium of 0.3 percent TV, molybdenum of 0.10 percent TV, aluminum of 0.04 percent TV and titanium of 0.16 percent TV; exhibiting yield strength of 793 M Pa, tensile strength of 93t MPa, elongation of 15 percent, bendability of 2xt and impact toughness of 27 J at -40' C (provided for in subheading 7208.36.00, 7208.37.00, 7208.38.00, 7208.39.00, 7225.30.30 or 7225.30.70), the foregoing also designated as (xv,I hot-rolled transformation-induced plasticity (TRIP) steel designated as X-061. as described below: (A) TRIP steel, Variety 1, not further worked than hot-rolled, with the followin\365 chemical composition, by wei\365ht: carbon, up to 0.2'1 percent: silicon, up to 2.2 percent; manganese, up to 1.8 percent; phosphorus, up to 0.025 percent; sulfur, up to 0.0'1 percent; physical and mechanical properties: thickness from 1.4 to 15.0 mm (inclusive): minimum yield point (MPa) of 3g0; minimum tensile stmn\365th (MPa) of 590; minimum elongation of 25 percent if '1400 mm to '1999 mm thickness range: minimum eloncjation of 215 percent if 2000 mm to 2499 mm thickness range; minimum elon9ation of 27 percent if 2500 mm to 3249 mm thickness range; minimum elongation of 28 percent if 3250 mm to 3999 mm thickness ran9e; or minimum elongation of 28 percent if 4000 mm to 15000 mm thickness range; (B) TRIP steel, Variety 2, not further worked than hot-rolled, with the followin\365 chemical composition, by weight: carbon, up to 0.23 percent, silicon, up to 2.2 percent, manganese, up to 2.0 percent; phosphorus, up to 0.025 percent; sulfur, up to 0.0'1 percent: physical and mechanical properties: thickness ran\365e from 1.4 to 15.0 mm (inclusive); minimum yield point (MPa) of 440\177 minimum tensile strength (MPa) of 1590; minimum eloncjation of 22 percent if 1400 mm to '1999 mm thickness ranCje; minimum elongation of 23 percent if 2000 mm to 2499 mm thickness range; minimum elongation of 24 percent if 2500 mm to 3249 mm thickness range; minimum elongation of 25 percent if 3250 mm to 39gg mm thickness range; or minimum elongation of 215 percent if 4000 mm to 15000 mm thickness ranCje; (G) TRIP steel, Variety 3, not further worked than hot-rolled, with the following chemical composmon, by weight: carbon, up to 0.25 percent; silicon, up to 2.2 percent; manganese, up to 2.2 pcrcent; phosphorus, up to 0.025 percent; sulfur, up to 0.01 percent; physical and mechamcal properties: thickness range from 1.4 to 6.0 mm (inclusive); minimum yield point (MPa) of 490; minimum tensile strength (MPa) of 780; miramum elongation of 20 percent if 1400 mm to 1999 mm thickness range; minimum elongation of 21 percent if2000 mm to 2499 mm thickness range; minimum elongation of 22 percent if2500 mm to 3249 mm thickness range; minimum elongation of 23 percent if3250 mm to 3999 mm thickness range; or minimum elongation of 24 percent if4000 mm to 6000 mm thickness range; or 3O

�