Page:The Art of Bookbinding, Zaehnsdorf, 1890.djvu/112

82 are not scraped away, or the squares will be made either too large or lop-sided.

Gilt on Red.—The edges are coloured by fanning them out as explained in colouring edges, and when dry, gilt in the usual way; not quite such a strong size will be wanted, through there being a ground in the colour; nor must any black lead be used. The edges should in this process he scraped first, then coloured and gilt in the usual way.

Tooled Edges.—The book is to be gilt as usual, then while in the press stamped or worked over with tools that are of some open character; those of fine work being preferable. Some design should be followed out according to the fancy of the workman. The tools must be warmed slightly so that the impression may be firm; the foredge should be done first. Another method is to tool the edge before burnishing, or the different portions of the tooling may be so managed in burnishing that some parts will be left bright and standing in relief on the unburnished or dead surface.

Painted Edges.—The edge is to fanned out and tied between boards, and whilst in that position some landscape or other scene, either taken from the book itself or appropriate to the subject of it, painted on the foredge, and when quite dry it is gilt on the flat in the usual manner. This work of course requires an artist well skilled in water-colour drawing. The colours used must be more of a stain than body colour, and the edges should be scraped first.

After the edges have been gilt by any of the foregoing methods, the rounding must be examined and corrected; and the book should be put into the standing press for two or three hours, to set it. The whole of the edges should be wrapped up with paper to keep them clean during the remainder of the process of binding. This is called "capping up."