Page:The Art of Bookbinding, Zaehnsdorf, 1890.djvu/111

Rh lay a piece of fine paper on the gold and gently flatten it with the burnisher. Books are often treated in this manner, they then become "dull gilt." When intended to be bright, a waxed cloth should be gently rubbed over the surface two or three times before using the burnisher. The beauty of burnishing depends upon the edge presenting a solid and uniform metallic surface, without any marks of the burnisher. The manner of burnishing is to hold a flat burnisher, where the surface is flat, firmly in the right hand with the end of the handle on the shoulder, to get better leverage. Work the burnisher backwards and forwards with a perfectly even pressure on every part. When both ends are finished, the foredge is to be proceeded with, by making it perfectly flat. It is better to tie the book, to prevent it slipping back. The foredge is to be gilt exactly in the same manner as the ends; it will of course return to its proper round when released from the press. This is done with all books in the ordinary way, but if the book is to have an extra edge, it is done "solid" or "in the round." For this way the book must be put into the press with its proper round, without flattening it, and scraped in that position with scrapers corresponding with the rounding. The greatest care must be taken in this kind of scraping that the sides