Page:The Ancient Stone Implements (1897).djvu/326

304 made from a flat flake, considerably curved longitudinally, and trimmed at the end as well as along a small portion of the left side. Some are more oval in form, and have been chipped along the sides, and somewhat rounded at the butt. In several instances the chipped edge at the butt-end is slightly worn away by friction, the edge of the rounded end being unworn.

Fig. 212 gives a kite-shaped scraper from Yorkshire, also made from a flat flake, but showing a considerable extent of the original crust of the flint of which it was made. It comes almost to a point at the butt-end, and both edges are somewhat chipped away as if the instrument had at that end been used as a boring tool. The point is somewhat rounded by friction. Occasionally, scrapers of this form are chipped on both faces at the pointed base, so as to make them closely resemble arrow-heads. It seems possible that this pointing was for the purpose of hafting the tool more readily in wood.

Fig. 213 shows one of what may be termed the duck-bill scrapers. It is made from a flat flake as usual, somewhat curved, and showing all along one side the original crust of the flint. It is neatly worked to a semicircular edge at the end, but the sides are left entirely untouched. I found it on the Sussex Downs, near Cuckmare Haven.

A smaller analogous instrument, from the Yorkshire Wolds, is shown in Fig. 214. It is made from an external flake, struck from a nodule of flint of small diameter. The end alone is trimmed. Scrapers made from such external flakes and splinters of flint are by no means uncommon. I have one which appears to have been made