Page:Steam shovels and steam shovel work (IA cu31924003942665).pdf/13

Rh but even in this crude state it possessed many advantages for removing large masses of material. Its merits were recognized in its earliest stages, and with increased experience in its operation improvements were soon made which rendered it almost indispensable on all works requiring large quantities of excavation.

It was not until 1865, however, that the machine came into general use. About this time the largely increased railway construction created an active demand for the steam shovel, which demand was quickly supplied by several manufacturers, whose machines vary in distinctive designs of various parts, but the principles of operation are essentially the same in them all.

Types of Steam Shovels—There are three types of steam shovels: First; machines mounted on trucks of standard gage, transported from place to place in freight trains (or propelled by their own power), and intended for railway work only. Second; machines mounted on wheels of other than standard gage, transported in sections by boat or wagon, or loaded complete on flat cars, and intended for both railway and other work. Third; machines mounted on wheels fitted for transportation over common roads, propelled by their own power, and intended for railway and other work.

The first machines built were of the second type. As now constructed they are mounted on a wide wooden frame or car body, supported by four small wheels of 7 ft. to 8 ft. gage, thus placing the machinery close to the ground, with a wide base of support. In transporting this machine from one place to another, not on the line of a railway, it is necessary to take it apart, forward the sections and put them together again at the site of the new work. The machine is built with a view to rapid dismantling and re-erection, and for work requiring a large machine for economical excavation, located in hilly country not yet made accessible by rail, or requiring transportation by boat, it is the machine most generally used. Its ready adaptability to all kinds of work in any location has made it the favorite machine with many general contractors whose work includes large contracts for railway and other excavation. For transportation by rail this machine is run onto an ordinary flat car, only the crane being detached and loaded on a separate car. With this manner of shipment the machine cam be made ready for railway work very quickly, but for exclusive railway work