Page:SpirellaAccessories1913page26 27.png

 Adaptability

Styles 113 and 114, Spirella brassieres, are designed to be used as corset covers, having slight confining features. Style 113 is adapted to slim and medium figures; style 114 is adapted for stout, medium figures, and is shorter than style 113. Illustration on opposite page shows style 113.

Description

Styles 113 and 114 are made only in rival batiste, suitably trimmed. Have Spirella boning in front. Closes in the back with a button and tape loop. Reinforcement under arms to protect the garment at point of wear.

Style 113, with proper selection, will care for a figure with development from 10 to 12 inches; under arm measurement 7½ inches; depth of back 8½ inches.

Style 114, with proper selection, will care for the shorter waisted figure with slightly less development; under arm measurement 6¼ inches; depth of back 7¼ inches. In other respects like Style 113.

Standard sizes 32 to 46, inclusive. Larger sizes, Special. In ordering special sizes, fill out Special and Custom Order Blank for Spirella bust confiners.

Adjustment

These garments are made long enough in front to slip under the skirt band, preventing the skirt from soiling corset; comes about to the waist line in the back. The back is adjusted by means of a button at the top and controlled at the bottom by tapes which pass around the body and tie in the front.

For sizes take actual bust measure and deduct one inch if the garment is designed to confine the figure. Make no deduction from actual measure if the figure be slender and the garment is to be used as a brassiere only. For measurements and selection of sizes, see booklet "How to Take Measurements". For prices, see price list.

Spirella Brassiere Style 113

(For additional style of this series see "Description" on opposite page)