Page:Small-boat sailing; an explanation of the management of small yachts, half-decked and open sailing-boats of various rigs; sailing on sea and on river; cruising, etc (IA smallboatsailing01knig).pdf/52

 a pull on it, a (Fig. 24) is employed.

When a rope has to be made fast to another rope in order to haul upon it, a (Fig. 25) is used, as this will not slip down if properly made. Thus, when a shroud has to be hauled out taut for setting up, the tail end of the tackle is fastened to the shroud with this hitch. In the figure the hitch appears with its parts loose; but these, of course, have to be drawn together and jammed before applying the strain.

To form a loop in a rope that will not slip or jam, a is employed. To make this knot (Fig. 26) a little practice is required.

In a (Fig. 27) the loop made by the bowline knot runs upon the standing part of the rope, thus forming a running noose.