Page:Simple Sabotage Field Manual.djvu/22

 (3) Production: Metals

(a) Iron and Steel

Keep blast furnaces in a condition where they must be frequently shut down for repair. In making fire-proof bricks for the inner lining of blast furnaces, put in an extra proportion of tar so that they will wear out quickly and necessitate constant re-lining.

Make cores for casting so that they are filled with air bubbles and an imperfect cast results.

See that the core in a mold is not properly supported, so that the core gives way or the casting is spoiled because of the incorrect position of the core.

In tempering steel or iron, apply too much heat, so that the resulting bars and ingots are of poor quality.

(b) Other Metals

No suggestions available.

(4) Production: Mining and Mineral Extraction

(a) Coal

A slight blow against your Davy oil lamp will extinguish it, and to light it again you will have to find a place where there is no fire damp. Take a long time looking for the place.

Blacksmiths who make pneumatic picks should not harden them properly, so that they will quickly grow dull.

You can easily put your pneumatic pick out of order. Pour a small amount of water through the oil lever and your pick will stop working. Coal dust and improper lubrication will also put it out of order.

Weaken the chain that pulls the bucket conveyers carrying coal. A deep dent in the chain made with blows of a pick or shovel will cause it to part under normal strain. Once a