Page:Shop management.djvu/115

108 the "old gang boss" who spent his whole time with the men into the four functions of (1) speed boss, (2) repair boss, (3) inspector, and (4) gang boss, and it is the introduction of these four shop bosses directly helping the men (particularly that of the speed boss) in place of the single old boss, that has produced the greatest improvement in the shop.

When functional foremanship is introduced in a large shop, it is desirable that all of the bosses who are performing the same function should have their own foreman over them; for instance, the speed bosses should have a speed foreman over them, the gang bosses, a head gang boss; the inspectors, a chief inspector, etc., etc. The functions of these over-foremen are twofold. The first part of their work is to teach each of the bosses under them the exact nature of his duties, and at the start, also to nerve and brace them up to the point of insisting that the workmen shall carry out the orders exactly as specified on the instruction cards. This is a difficult task at first, as the workmen have been accustomed for years to do the details of the work to suit themselves, and many of them are intimate friends of the bosses and believe they know quite as much about their business as the latter. The second function of the over-foreman is to smooth out the difficulties which arise between the different types of bosses who in turn directly help the men. The speed boss, for instance, always follows after the gang boss on any particular job in taking charge of the workmen. In this way their respective duties come in contact edgeways, as it were, for a short time, and at the start there is sure