Page:Self-help with illustrations of conduct and perseverance (IA selfhelpwithillu00smiliala).pdf/237

 statue. Then coating the wax with a sort of earth, he baked the second covering, during which the wax dissolved and escaped, leaving the space between the two layers for the reception of the metal. To avoid disturbance, the latter process was conducted in a pit dug immediately under the furnace, from which the liquid metal was to be introduced by pipes and apertures into the mould prepared for it.

Cellini had purchased and laid in several loads of pine-wood, in anticipation of the process of casting, which now began. The furnace was filled with pieces of brass and bronze, and the fire was lit. The resinous pine-wood was soon in such a furious blaze, that the shop took fire, and part of the roof was burnt; while at the same time the wind blowing and the rain falling on the furnace kept down the heat, and prevented the metals from melting. For hours Cellini struggled to keep up the heat, continually throwing in more wood, until at length he became so exhausted and ill, that he feared he should die before the statue could be cast. He was forced to leave to his assistants the pouring in of the metal when melted, and betook himself to his bed. While those about him were condoling with him in his distress, a workman suddenly entered the room, lamenting that "poor Benvenuto's work was irretrievably spoiled!" On hearing this, Cellini immediately sprang from his bed and rushed to the workshop, where he found the fire so much gone down that the metal had again become hard.

Sending across to a neighbour for a load of young oak which had been more than a year in drying, he soon had the fire blazing again and