Page:Project Longshot - Advanced Design Program Project Report.pdf/49

Rh

3.4 Communications System Design
The major challenges for the communications system of the interstellar probe both occur when the probe enters the target system at a range of 4.3 light-years, or 4.109 x 10^16 meters. This is the maximum transmission range; a fairly high data rate must be maintained, since all probe instrumentation is returning data. The only type of communications system capable of the necessary directivity and data rate is a high-power laser using pulse code modulation (PCM).

Low background noise from the target system is necessary for a low power level, so a laser wavelength of 0.532 microns was chosen. Radiation of this wavelength is almost totally absorbed by the outer atmospheres of K and G type stars, leaving a hole in the absorption spectrum (no transmitted radiation). Laser radiation of this wavelength can then be produced by a frequency-doubled diode-pumped YAg laser with an optical attachment to provide a large initial aperture.

The transmitter aperture is 2 meters in diameter with receiving mirrors of 24 meters diameter. The spreading angle is 1.22*lambda divided by the aperture diameter, or 3.25 x 10^-7 radians (0.067 arcseconds). At 4.34 light-years, the spreading results in a footprint radius of 13.4 million kilometers, 8.9% of an Astronomical Unit (AU). Both the pointing accuracy of the laser mount and the attitude determination capability of the probe must be within 0.067 arcseconds, so very low error laser mounts and star trackers will be used.