Page:Popular Science Monthly Volume 56.djvu/678

662 reheating of the tube is very apt to lead to a disastrous cracking of the glass. He must take the utmost precautions against unequal heating and sudden cooling, and he must, above all, have phenomenal patience.

Fig. 1 shows the evolution of the Crooke's tube which is used to produce the X rays. The first form of tube was barely larger than a goose's egg. The size has been gradually increased, and at present it is three or four times larger than the original form. The interior arrangement has not been materially changed, and consists, as we have said, of a concave mirror, which constitutes the negative electrode, and an inclined sheet of platinum, from which the X rays seem to emanate.

The later forms of tube have accessory chambers, filled with certain chemicals, which, on being slightly heated, reduce the vacuum to the desired point. Certain forms of tubes have merely an additional chamber which, on being heated, reduces the vacuum in the main vessel. The latest form of tube, devised by Dr. William Rollins, of Boston, has a hollow anode tube (B C, Fig. 1), through which a current of water can circulate in order to save the tube from breaking. The end of this anode tube is small, in order to form a sharp radiant point of light. One of the platinum wires (P) inserted in the tube projects outside some distance. When the vacuum becomes too high in the tube, this platinum wire is slightly heated in a gas flame; then the flame is blown out and the hydrogen is allowed to flow against the heated wire. A sufficient amount of the gas is absorbed by the heated wire to reduce the vacuum in the tube. This tube stands very powerful electrical discharges, and is the most scientifically designed tube at the command of the experimenter.

There are three methods of generating the electrical discharge which produces the rays. The commonest method is that in which the Ruhmkorf coil is used. This coil is what is now known as a transformer, and consists of one coil of a few turns of coarse wire, which is connected to a battery or other source of electricity, and of another coil surrounding the first of a great number of turns of fine wire. Any sudden change of the battery current produces an electric pressure or electro-motive force at the ends of the fine coil of wire. By this simple arrangement of two coils we can thus exalt a current of low pressure to one of high electro-motive force. A battery current which can barely produce an electric spark of one hundredth of an inch at the ends of the coarse coil can cause a spark of eight inches or more at the terminals of a fine coil.

In the second method one uses an ordinary electrical machine in which the glass plates are supplanted by rubber ones, which are