Page:Popular Science Monthly Volume 40.djvu/37

Rh This event was a great disappointment to all those who had filled the air with predictions of failure, and they immediately turned their attention to a general depreciation of the results attained, and the persecution, with renewed vigor, of all who were responsible for them.

The first steel rails produced in America were rolled at the works of the Chicago Rolling-Mill Company (now a part of the Illinois Steel Company's plant, but then under the superintendency of O. W. Potter, Esq., late President of the Illinois Steel Company), at Chicago, on the 24th day of May, 1865. These rails were successfully rolled in a "twenty-one-inch three-high train," whose rolls were intended for rolling iron rails, and this fact is indubitable evidence of the excellent quality of the steel. There were three rails rolled on the 24th, and on the 25th three others. Various experiments were tried to test the ductility and working qualities of the steel produced at Wyandotte; some of the early product was sent to Bridge water, Mass., and there rolled into tack plate and cut into tacks, which were pronounced to be very much superior to any previously made of iron. In order to test the welding qualities of the steel, John Bishop, the blacksmith of the works, made a tobacco-pipe, the size of an ordinary clay pipe, the bowl and stem of which were welded up of Wyandotte steel, and when perfectly polished there was no visible evidence of a weld. I have now two jackknives and a razor made from this steel; the knives are rather soft, but the razor was used regularly by my father for fifteen years, to his entire satisfaction.

When it had been shown that the pneumatic process was a qualitative success, instead of carrying out the original understanding and erecting new works arranged with especial reference to rapid and economical working, the parties in interest insisted that I should put a second converter into the experimental works, and attempt to make it a commercial success. Knowing that such an attempt could only result in utter failure, I resigned my position (June 1, 1865). Nevertheless, the proposed plan was carried out, and the works were permanently closed after about a year's unprofitable experience.

While the experimental works were being constructed at Wyandotte, the firm of Winslow, Griswold & Holley was formed for the purpose of purchasing Bessemer's American patents, and manufacturing steel under them. Negotiations with Bessemer were concluded in the spring of 1964, and an experimental plant at Troy, N. Y., was started on February 16, 1865.