Page:Popular Science Monthly Volume 2.djvu/603

Rh It will only be necessary here to speak of the powers of resistance of a few among the many kinds of wood now employed in the mechanical arts. The greater number of the varieties of wood owe their commercial value to special characteristics, such as beauty of grain and capability of being polished—the description of which does not fall within the scope of the present article.

As a general rule, we may judge of the hardness of a wood by its specific gravity, if it is in its natural state. But the density may be increased by artificial compression, and this increase of density is generally accompanied by increase of strength. Some varieties of wood, as, for instance, lignumvitæ, are so dense that they sink in water, while some of the softer woods have not half the density of that fluid. The presence of gum or resin in any wood adds both to its strength and durability. Many woods will last a long time if kept constantly under water, but scarcely any wood is very durable when allowed to become wet and dry alternately.

The strength of a piece of timber depends upon the part of the tree from which it is taken. Up to a certain age, the heart of the tree is the best; after that period, it begins to fail gradually. The worst part of a tree is the sap-wood, which is next the bark. It is softer than the other parts of the wood, and is liable to premature decay. The deleterious component of the sap-wood is absorbed, if the tree is allowed to grow for a longer period, and in time the old sap-wood becomes proper timber-fibre similar to heart-wood. Hence, the goodness of a tree, for timber purposes, depends on the age at which the tree was cut down. When young, the heart-wood is the best; at maturity, with the exception of the sap-wood, the trunk is equally good throughout; and, when the tree is allowed to grow too long, the heart-wood is the first to show symptoms of weakness, and deteriorates gradually.

The best timber is secured by felling the tree at the age of maturity, which depends on its nature as well as on the soil and climate. The ash, beech, elm, and fir, are generally considered at their best when of 70 or 80 years' growth, and the oak is seldom at its best in less time than 100 years, but much depends on surrounding circumstances. As a rule, trees should not be cut before arriving at maturity, because there is then too much sap-wood, and the durability of the timber is much inferior to that of trees felled after they have arrived at their full development.

The strength of many woods is nearly doubled by the process of seasoning, hence it is very thriftless to use timber in a green state, as it is not only weak, but is exposed to continual change of bulk, form, and stability. After timber is cut, and before it is properly seasoned, the outside is found to crack and to split more than the inside of the mass, because it is more exposed to the desiccating effect of the surrounding atmosphere, but, as the outside dries, the air gradually finds its way to the interior. If timber is cut up by the saw when green,