Page:NIOSH Manual of Analytical Methods - Chapter O.pdf/23

 [60] [61] [62] [63] [64]

[65] [66] [67] [68]

[69]

[70] [71] [72] [73] [74]

[75] [76]

[77]

[78] [79]

3/15/03

Johnston AM, Vincent JH, Jones AD [1985]. Measurements of electric charge for workplace aerosols. Ann Occup Hyg 29:271-284. Baron PA, Deye GJ [1990]. Electrostatic effects in asbestos sampling II: comparison of theory and experiment. Am Ind Hyg Assoc J 51:63-69. Liu BYH, Pui DYH, Rubow KL, Szymanski WW [1985]. Electrostatic effects in aerosol sampling and filtration. Ann Occup Hyg 29:251-269. Baron PA, Deye GJ [1990]. Electrostatic effects in asbestos sampling I: experimental measurements. Am Ind Hyg Assoc J 51:51-62. Baron PA, Chen CC, Hemenway DR, O'Shaughnessy P [1994]. Non-uniform air flow in inlets: the effect on filter deposits in the fiber sampling cassette. Am Ind Hyg Assoc J 55:722-732. Almich BP, Carson GA [1974]. Some effects of charging on 10-mm nylon cyclone performance. Am Ind Hyg Assoc J 34:603-612. Briant JK, Moss OR [1984]. The influence of electrostatic charges on the performance of 10-mm nylon cyclones. Am Ind Hyg Assoc J 45:440-445. Lowrey L, Tillery M [1979]. Filter weight stability evaluation. October 1979. LA-8061-MS. Los Alamos NM: Los Alamos National Laboratory. Bowman JD, Bartley DL, Breuer GM, Doemeny LJ, Murdock DJ [1984]. Accuracy criteria recommended for the certification of gravimetric coal mine dust samplers. July 1984. NTIS PB 85-222446. Washington DC: National Technical Information Service. NIOSH [1994]. Method 0500. Eller PM, Editor. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, DHHS (NIOSH). Chen C-C, Baron PA [1995]. Vortices in anisoaxial sampling inlets. Aerosol Sci Technol 23:224-230. Mark D [1974]. Problems associated with the use of membrane filters for dust sampling when compositional analysis is required. Ann Occup Hyg 17:35-40. Blackford DB, Harris GW, Revell G [1985]. The reduction of dust losses within the cassette of the SIMPEDS personal dust sampler. Ann Occup Hyg 29:169-180. Feigley CE, Maguire KE, Hussey JR [1992]. Asbestos fiber deposition patterns on various 25-mm cassette filters at a high flow rate. Appl Occup Environ Hyg 7:749-757. Sass-Kortsak AM, O'Brien CR, Bozek PR, Purdham JT [1993]. Comparison of the 10mm nylon cyclone, horizontal elutriator, and aluminum cyclone for silica and wood dust measurements. Appl Occup Environ Hyg 8:31-37. Aitken RJ, Vincent JH, Mark D [1993]. Application of porous foams as size selectors for biologically relevant samplers. Appl Occup Environ Hyg 8:363-369. Vincent JH, Aitken RJ, Mark D [1993]. Porous plastic foam filtration media: penetration characteristics and applications in particle size-selective sampling. J Aerosol Sci 24:929-944. Hauck BC, Grinshpun SA, Reponen A, Reponen T, Willeke K, Bornschein RL [1996]. Field testing of new aerosol sampling method with a porous curved surface as inlet. Am Ind Hyg Assoc J 58:713-719. Hook MB, Feigley CE, Ludwig DA [1983]. Interwedge variation in the membrane filter method for airborne asbestos fibers. Am Ind Hyg Assoc J 44:542-546. Demange M, Gendre JC, Herve-Bazin B, Carton B, Peltier A [1990]. Aerosol evaluation difficulties due to particle deposition on filter holder inner walls. Ann Occup Hyg 34:399403.

206

NIOSH Manual of Analytical Methods