Page:NIOSH Manual of Analytical Methods - Chapter D.pdf/3

 Activated charcoal
 * By far the most commonly used solid sorbent. Very large surface area:wt. ratio. Reactive surface, high adsorptive capacity. This surface reactivity means that activated charcoal is not useful for sampling reactive compounds (e.g., mercaptans, aldehydes) because of poor desorption efficiency. The high capacity, however, makes it the sorbent of choice for those compounds which are stable enough to be collected and recovered in high yield. Breakthrough capacity is a function of type (source) of the charcoal, its particle size and packing configuration in the sorbent bed. Humidity may affect the adsorption as well.

Silica gel
 * Less reactive than charcoal. Because of its polar nature, it is hygroscopic and shows a decrease in breakthrough capacity for non-water soluble substances with increasing humidity [3].

Porous polymers
 * Lower surface area and much less reactive surface than charcoal. Adsorptive capacity is, therefore, generally lower, but reactivity is much lower as well.

Ambersorbs™
 * Properties midway between charcoal and porous polymers.

Coated sorbents
 * One of the sorbents upon which a layer of a reagent has been deposited. The adsorptive capacity of such systems usually approaches the capacity of the reagent to react with the particular analyte [4].

Molecular sieves
 * Zeolites and carbon molecular sieves retain adsorbed species according to molecular size. A limiting factor is that the water molecule is of similar size to many small organic compounds and is usually many orders of magnitude higher in concentration than the species of interest. This unfavorable situation may result in the displacement of the analyte by water molecules. Drying tubes may be used during sampling to eliminate the effects of humidity [5].

Thermal desorption
 * Thermal desorption tubes may contain several different sorbents in order to collect a wide range of different chemicals [6]. These tubes are generally used in situations where unknown chemicals or a wide variety of organics are present, e.g., in indoor environmental air quality investigations. Analysis is often by gas chromatography/mass spectrometry (GC/MS).
 * NOTE: Solid sorbents are used for the collection of vapors only. Aerosols are not collected effectively by most sorbent beds, but may be collected by other components of the sampler (e.g., a prefilter, or the glass wool plugs used to hold the sorbent bed in place).

Membrane filters
 * By far the most frequently used filters. This class of filters includes those made from

1/15/98