Page:NIOSH Manual of Analytical Methods - 7303.pdf/4

 ELEMENTS by ICP (Hot Block/HCl/HNO3 Ashing): METHOD 7303, Issue 1, dated 15 March 2003 - Page 4 of 6 TABLE 1: ANALYTE INFORMATION FOR VALID ELEMENTS AND COMPOUNDS Properties Analyte Al As Au B Ba Be Bi Ca CaO Cd Co Cr Cu Fe Fe 2O 3 (as Fe) Ga In Mg MgO Mn Mo Nd Ni P Pb Pd Pt Sb Se Sn Sr Te Ti Tl V Y Zn ZnO

LOD (:g/mL)

LOQ (:g/mL)

MW 26.98 74.92 196.97 10.81 137.34 9.01 208.98 40.08 56.08 112 .4 58.93 52.00 63.54 55.85 159.69

MP (°C) 660 817 10.63 2177 3.51 2178 271 842 2927 321 1495 1890 1083 1535 1462

0.111 0.009 0.015 0.0094 0.0018 0.00075 0.025 0.099 0.139 0.0037 0.003 0.009 0.020 0.070 0.070

0.37 0.03 0.05 0.0283 0.006 0.0025 0.085 0.33 0.462 0.012 0.011 0.03 0.060 0.20 0.20

69.72 114.82 24.31 40.32 54.94 95.94 92.906 58.71 30.97 207.19 106 .4 195.09 121.75 78.96 118.69 87.62 127.60 47.90 204.37 50.94 88.91 65.37 81.37

29.75 156.3 651 2825 1244 651 2477 1453 44 328 1550 1769 630.5 217 232 769 450 1675 304 1890 1495 419 1970

0.03 0.015 0.047 0.078 0.0012 0.0072 0.01 0.012 0.3 0.023 0.009 0.0045 0.018 0.021 0.015 0.002 0.15 0.005 0.044 0.003 0.001 0.022 0.027

0.09 0.05 0.14 0.23 0.004 0.024 0.03 0.039 1.0 0.07 0.03 0.015 0.06 0.064 0.05 0.006 0.5 0.016 0.133 0.01 0.003 0.066 0.082

Estimated LOQ (:g/sam ple)* 9.25 0.075 1.25 0.71 0.15 0.062 2.12 8.25 11.6 0.30 0.27 0.75 1.50 5.00 5.00

M inim um ** air vol. (L)

2.25 1.25 3.50 5.75 0.10 0.60 0.75 0.98 25 1.75 0.75 0.38 1.50 1.60 1.25 0.15 12.5 0.40 3.32 0.25 0.075 1.65 2.05

2 8 1 1 1 35 1 2 3 3 3 8 15 1 1 1 15 1 5 0.05 0.5 0.1 1 250 35 0.1 200 3 8 1 300 125 0.1 35 2.5 0.1 0.5 0.5

M axim um *** air vol. (L) 10,000 5,000,000 3,300 3,300 100,000 25,000,00 10,000 10,000 10,000 500,000 500,000 500,000 500,000 5,000 5,000 3,300 500,000 10,000 33,000 10,000 10,000 3,300 50,000 500,000 100,000 3,300 25,000,000 100,000 250,000 25,000 100,000,000 500,000 10,000 500,000 500,000 50,000 10,000 10,000

Value based on a 25-mL sample volume. The minimum sampling volume needed to obtain the OSHA PEL at the LOQ for the element/compound at a sample digestion volume of 25 m L. The m aximum sampling volume for a given sample, calculated by taking 50,000 :g as th e lim it for the element/compound per sample. NOTE: The LOD and LOQ values are dependent on the particular analytical instrument used. Also, LOD and LOQ values may vary for a particular elemen t due to certain interelement interferences.

NIOSH Manual of Analytical Methods (NMAM), Fourth Edition