Page:NIOSH Manual of Analytical Methods - 5524.pdf/7

 METALWORKING FLUIDS (MWF) ALL CATEGORIES: METHOD 5524, Issue 2, dated 29 December 2014 - Page 7 of 10

[2]	 BSI (British Standards Institute) [2014]. BS EN 13205:2014. Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Parts 1 through 6. Brussels, Belgium: European Committee for Standardization. [3]	 Glaser RA, Shulman S, Kurimo R, Piacitelli G [2002]. Data supporting a provisional American Society for Testing and Materials (ASTM) Method for metalworking fluids, Part 3: evaluation of a provisional ASTM Method for metalworking fluids in a survey of metalworking facilities. Journal of Testing and Evaluation 20(5): 439-451. [4]	 Glaser RA, Shulman S, Klinger P [1999]. Data supporting a provisional American Society for Testing and Materials (ASTM) Method for metalworking fluids, Part 2: preliminary report of evaluation of a ternary extraction solvent in a provisional ASTM Test Method for metalworking fluids (PS-42-97). Journal of Testing and Evaluation 17(3):131-136. [5]	 Glaser RA [1999]. Data supporting a provisional American Society for Testing and Materials (ASTM) Method for metalworking fluids, Part 1: a solvent blend with wide-ranging ability to dissolve metalworking fluids. Journal of Testing and Evaluation 17(3):171-174. [6]	 Glaser RA, Kurimo R, Neumeister C, Shulman S [2005]. Data supporting ASTM Method D7049-04 for determination of metalworking fluids, ASTM Journal of Testing and Evaluation, 33(5). [7]	 NIOSH [1994]. Particulates not otherwise regulated: Method 0500. In: Eller PM, Cassinelli ME, eds. NIOSH Manual of Analytical Methods, 4th ed. Cincinnati OH: U. S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, DHHS (NIOSH) Publication No. 94-113. [www.cdc.gov/niosh/nmam/]. [8]	 NIOSH [1994]. Oil Mist, Mineral: Method 5026. In: Eller PM, Cassinelli ME, eds. NIOSH Manual of Analytical Methods, 4th ed. Cincinnati OH: U. S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, DHHS (NIOSH) Publication No. 94-113. [www.cdc.gov/niosh/nmam/]. [9]	 ASTM D7049 [2010]. Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres. ASTM International, West Conshohocken, PA. [10]	 Piacitelli G, Hughes R, Catalano J, Sieber W, Glaser RA, Kent M [1997]. Exposures to Metalworking fluids in small size machine shops. Presented at The Industrial Metalworking Environment: Assessment and Control of Metal Removal Fluids Symposium, Detroit, Michigan, September 1997. [11]	 Glaser RA, Kurimo R, Shulman S [2007]. Performance testing of NIOSH Method 5524/ASTM method D-7049-04 for determination of metalworking fluids. J Occup Environ Hyg, 4:583-595. METHOD WRITTEN BY: R. Glaser, NIOSH/DART and edited by Y. T. Gagnon, NIOSH/DART. Disclaimer: Mention of any company or product does not constitute endorsement by the National Institute for Occupational Safety and Health. In addition, citations to Web sites external to NIOSH do not constitute NIOSH endorsement of the sponsoring organizations or their programs or products. Furthermore, NIOSH is not responsible for the content of these Web sites. All Web addresses referenced in this document were accessible at the time of publication. the following sources for updated limits and guidelines. [1,2]
 * NOTE:	Because exposure limits and guidelines may change over time, NIOSH recommends referring to

NIOSH Manual of Analytical Methods (NMAM), Fifth Edition