Page:Kitecraft and kite tournaments (1914).djvu/20

12 anese, Korean and Chinese kites. Wire can be used for frames of small kites.

Lashing. When two sticks are to be fastened together, instead of nailing with a small brad, they should be lashed. First wind diagonally around both sticks in both directions, Fig. 2; then wind between sticks around the other windings. This draws all the cord up tight, Fig. 3. Coat over with glue or shellac.

Large box-kite frames with sawn out material should have the upright posts let into the long horizontal pieces a little, Fig. 4. If a brace is notched at the end to fit over another piece, Fig. 5, and is liable to split out, it can be wound just back of the notch with thread, Fig. 6, and coated with shellac. All windings should be neatly done without criss-cross windings as in Fig. 7. Which do you like best Fig. 6 or Fig. 7?

Collapsible Frames. Folding frames can be made for most kites. Large tailless kites have either a removable spine or bow, the square box-kite has braces that spring into shallow notches, and the triangular box and house kite combination can be rolled by having a removable cross-stick. It is a great advantage to have folding kites.