Page:Home labor saving devices (1917).djvu/94





10' of poplar. 22 No. 16 brads, 3/4", for nailing joints. 2-1/2 pairs of 1-1/2" (butt) hinges to be used in joining the panels, fastening the drop shelf to crosspiece, and adjusting the bracket. 20 No. 5 flat-headed screws, 5/8", used for hinges. 2 metal handles to put on top of each side of screen. 4 No. 5 screws, 1/2", to put handles on. 2 yds. burlap to cover the screen. 1 box brass-headed tacks to put burlap on screen. 12 brass cup hooks to be used on crosspiece. 1 yd. of creton to make pockets. Sandpaper and stain.



Stiles: 4 pieces 1-1/2" × 1-1/2" × 30", to be used as upright pieces to screen.

Crosspieces: 4 pieces 1-1/2" × 1-1/2" × 12-1/2", to be used at the top and bottom of frame.

2 pieces 1-1/2" × 1-1/2" × 12-1/2", to be used for pegs to hold spools.

1 piece 1-1/2" × 1-1/2" × 12-1/2", to hinge the shelf.



On the two upright pieces (1-1/2" × 1-1/2" × 30") make 4-3/4" mortises to fit the tenons made on the crosspieces, making the first mortise 1" from the bottom of the frame and the second mortise 16-1/2" from the first. The third and fourth mortises in the upright piece are made 2-1/4" apart and