Page:Home labor saving devices (1917).djvu/33





Sides: 2 pieces 1" thick × 12" wide × 15-1/2" long.

Ends: 2 pieces 1" thick × 12-1/2" wide × 17-1/2" long.

Handles: 2 pieces 1" thick × 2-1/2" wide × 4" long.

Plugs: 2 pieces 1" thick × 1" wide × 3" long.



Saw the two end pieces according to the illustration. Measure 6-1/2" from the bottom of each end and cut them out 1/4" to fit sides (1" thick) placing the sides 3/4" from the outer side of the end pieces. Measure equal spaces from each side of the ends and put the handles 1-1/2" from the top edge. Bore two holes 3/4" in diameter near the bottom of the end to fit the plugs. Bevel the two sides (1" × 12" × 15-1/2") at the bottom so as to make a tight and neat joint. Screw the end pieces to the sides. Screw the brass cup hooks at equal distances apart around the top edge of the strainer.