Page:Experimental researches in chemistry and.djvu/273

258 crucibles are manufactured. These we obtained through the intervention of our President; they were purposely manufactured for us by Mr. Michell of Caleneck in Cornwall, a gentleman who has been ever willing and anxious to assist us in our inquiries, by supplying us with vessels of any size or form, or any other article which it was in his power to produce.

53. The Cornish plates have not much cohesion, and feel tender in the hand. They may be rubbed down to a Hat surface, and resist any heat which can be applied to them in these or in much more powerful furnaces. They are therefore readily brought to any thickness, and when of about ⅝ths of an inch, and supported in the furnace as before described (47), have strength to bear any weight required to be placed upon them. They do not crack, nor do they force themselves to pieces by expansion; but they are porous, as indeed are in a greater or smaller degree all the materials of which the chamber and its sides are now composed.

54. The porosity of these materials was of great importance; for it allowed of the passage of gaseous matter, and that even of a reducing nature, from the fire into the chamber. I have frequently had evidence that the sides and bottom might be considered as a very sieve-like partition between the fire, the flue, and the space called the chamber; for when the upper aperture has been closed, there has been a current through the chamber in the direction of the flame, the gaseous matter entering at the extremity nearest the fire, and passing out at the end towards the Hue. In one or two cases, oxide of lead was actually reduced, and the glass thus rendered cloudy.

55. Hence it became necessary to use some certain means of maintaining an oxygenating atmosphere about the glass; to obtain which, and also to prevent any other injurious vapours from the fire entering the space beneath and within the earthenware covers (51), the expedient was adopted of allowing a current of fresh air to pass continually into that space and circulate about the glass. To effect this, a clean earthenware tube, glazed within, was inserted horizontally into the side of the furnace, in such a manner that one extremity was' flush with the inside of the chamber, and of such height, that its lower edge corresponded with the level of the bottom upon which the glass in