Page:Encyclopædia Britannica, Ninth Edition, v. 14.djvu/258

 246 LAMP and, bending over, descends along the outside of d. The part rn, that supports the glass chimney, is connected by four other wires with the ring q, which surrounds the tube d, and can be moved round. When rn is turned round, it carries with it the ring q, the wire S, and the tube/, and thereby produces elevation or de pression of the wick. A device in the form of a small metallic disk or button, known as the Liverpool button from having been first adopted in the so-called Liverpool lamp, effects for the current of air passing up the interior of the Argand burner the same object as the constriction of the chimney KG secures in the case of the external tube. The button fixed on the end of a wire is placed right above the burner tube g, and throws out equally all round against the flame the current of air which passes up through g. The result of these expedients, when properly applied, is the production of an exceedingly solid brilliant white light, absolutely smokeless, this showing that the combustion of the oil is perfectly accomplished. The means by which a uniformly regulated supply of oil is brought to the burner varies of course with the position of the oil reservoir. In some lamps, not now in use, by ring-formed reser voirs and other expedients, the whole of the oil was kept as nearly as possible at the level of the burner. In what are termed fountain, reading, or study lamps, the principal reservoir is above the burner level, and various means are adopted for maintaining a supply from them at the level of the burner. But the most convenient position for the oil reservoir in lamps for general use is directly under the burner, and in this case the stand of the lamp itself is utilized as the oil vessel. In the case of fixed oils it is necessary with such lamps to introduce some appliance for forcing a supply of oil to the burner, and very many methods of effecting this have been de vised, most of which were ultimately superseded by the moderator lamp. The Carcel or pump lamp, invented by Carcel in 1800, is still to some extent used in France. It consisted of a double piston or pump, forcing the oil through a tube to the burner, worked by ingenious clockwork arranged to go a certain number of hours. An example of a form of reading lamp still in general use is seen in section in fig. 2. The lamp is mounted on a standard on which it can be raised or lowered at will, and fixed by a thumb screw. The oil reservoir is in two parts, the upper ac being an inverted flask which fits into bb, from which the burner is directly fed through the tube d; h is an overflow cup for any oil that escapes at the burner, and it is pierced with air-holes for admitting the current of air to the centre tube of the Argand burner. The lamp is filled with oil by withdrawing the flask ac, filling it, and inverting it into its place. The under reservoir Ib fills from it to the burner level ee, on a line with the mouth of ac. So soon as that level falls below the mouth of ac, a bubble of air gets access to the upper reservoir, and oil again fills up bb to the level ce, and so on it goes as long as FlG - 2. Section of Reading Lamp, combustion continues and the supply of oil in ac endures. The principle is susceptible of numerous modifications. The moderator lamp (fig. 3), invented by M. Franchot about 1836, from the simplicity and efficiency of its arrangements rapidly super seded almost all other forms of mechanical lamp. The two essential features of the moderator lamp are (1) the strong spiral spring which, acting on a piston within the cylindrical reservoir of the lamp, serves to propel the oil to the burner, and (2) the ascending tube G through which the oil passes upwards to the burner. The latter consist of two sections, the lower fixed to and passing through the piston A into the oil reservoir, and the upper attached to the burner. The lower or piston section moves within the upper, which forms a sheath enclosing nearly its whole length when the spring is fully wound up. Down the centre of the upper tube passes a wire, &quot;the moderator, G, and it is by this wire that the supply of oil to the burner is regulated. The spring exerts its greatest force on the oil in the reservoir when it is fully wound up, and in proportion as it expands and descends its power decreases. But when the apparatus is wound up the wire passing down the upper tube extends through out the whole length of the lower and narrower piston tube, ob structing to a certain extent the free flow of the oil. In proportion as the spring uncoils, the length of the wire within the lower tube Lecreased ; the upward flow of oil is facilitated in the same i the force urging it upwards is weakened. In all mechani cal lamps the flow is in excess of the consuming capacity of the urner, and in the moderator the surplus oil, flowin^ over the wick falls back into the reservoir above the piston, whence along with new supply oil it descends into the lower side by means of leather valves a, a. 13 represents the rack which, with the pinion D, winds up the spiral spring hard against E when the lamp is prepared for use. The moderator wire is seen separately in G&quot;G ; and FGC illustrates the arrangement of the sheath ing tubes, in the upper section of which the mo derator is fixed. Lamps for Mineral Oils. At an early period numerous at tempts were made to utilize the highly in flammable volatile hy drocarbons and alco hols, which from their cheapness and abund ance offered some hope of competing with the fixed oils then in uni versal use for illumi nating purposes. These lamps had little success. and no small danger accompanied their li mited use. The Vesta Fio. 3. Section of Moderator Lamp. lamp of Young, introduced in 1834 for burning spirit ot turpentine under the name of camphine, procured a smoke less flame by means of the Argand burner, constricted chimney, and Liverpool button, with the access of abundant air. It was not, however, till the introduction of paraffin oils and petroleum that mineral oil lamps became of great importance. Lamp makers had not to direct their attention to mechanical arrangements, for mineral oils rise abundantly by capillarity alone ; the problem was to produce a suffi ciently powerful current of air to ensure complete and smokeless combustion of these richly carbonaceous com pounds, and, in view of the highly volatile nature of the liquids dealt with, to prevent their exposure to the air, and more particularly to prevent the heating of the oil reservoir which would generate explosive mixtures, or vapours of dangerous tension. Mineral oil lamps, like those for fixed oils, are constructed with both circular or tubular and flat-wick burners. In the case of the latter a cone or brass cap is placed over the burner, having a slit or opening a little longer and wider than the wick -holder itself. This cone serves to direct the whole current of air which enters below against the surface of the flame, and mingling with the vapour of the oil pro duces perfect combustion, with a white flame which rises over the slit in the cone. The cool air current entering under the cone is also beneficially utilized in preventing the undue heating of the oil reservoir and the metallic wick-holder which passes down into it. These flat wick lamps are simple in construction, cheap, and, so far as they go, economical light producers, but their flame is thin, and it is not practicable to compensate for the thinness by increased breadth of wick, because in such a case the edges of the light come so near the chimney that at these points the glass becomes rapidly heated, causing unequal expansion and destruction of the chimney. In 1865 Messrs James & Joseph Hinks of Birmingham secured a patent for improvements in the burners of mineral oil lamps, &quot; whereby two or more flat flames or one circular or nearly circular flame may be produced by the use of two or more single flat wicks.&quot; Under this patent was manufactured their well-known duplex lamp, which has gone far to supersede all other forms.