Page:Edinburgh Review Volume 59.djvu/318

306 calculating part of the mechanism, by conceiving seven steel axes erected, one beside another, on each of which shall be placed eighteen wheels, five inches in diameter, having cylinders or barrels upon them an inch and a half in height, and inscribed, as already stated, with the ten arithmetical characters. The entire elevation of the machinery would occupy a space measuring ten feet broad, ten feet high, and five feet deep. The process of calculation would be observed by the alternate motion of the figure wheels on the several axes. During the first quarter of a turn, the wheels on the first, third, and fifth axes would turn, receiving their addition from the second, fourth, and sixth; during the second quarter of a turn, such of the wheels on the first, third, and fifth axes, to which carriages are due, would be moved forward one additional figure; the second, fourth, and sixth columns of wheels being all this time quiescent. During the third quarter of a turn, the second, fourth, and sixth columns would be observed to move, receiving their additions from the third, fifth, and seventh axes; and during the fourth quarter of a turn, such of these wheels to which carriages are due, would be observed to move forward one additional figure; the wheels of the first, third, and fifth columns being quiescent during this time.

It will be observed that the wheels of the seventh column are always quiescent in this process; and it may be asked, of what use they are, and whether some mechanism of a fixed nature would not serve the same purpose? It must, however, be remembered, that for different tables there will be different constant differences; and that when the calculation of a table is about to commence, the wheels on the seventh axis must be moved by the hand, so as to express the constant difference, whatever it may, be. In tables, also, which have not a difference rigorously constant, it will be necessary, after a certain number of calculations, to change the constant difference by the hand; and in this case the wheels of the seventh axis must be moved when occasion requires. Such adjustment, however, will only be necessary at very distant intervals, and after a considerable extent of printing and calculation has taken place; and when it is necessary, a provision is made in the machinery by which notice will be given by the sounding of a bell, so that the machine may not run beyond the extent of its powers of calculation.

Immediately behind the seven axes on which the figure wheels