Page:Edinburgh Review Volume 59.djvu/316

304 the next number of the Table exhibited in Fig. 5. During this process the machinery would be engaged in shifting the copper both in the direction of its length and its breadth, with a view to commence the printing of another line; and this change of position would be accomplished at the moment when the next calculation would be completed: the printing of the next number would go on like the former, and the operation of the machine would proceed in the same manner, calculating and printing alternately. It is not, however, at all necessary—though we have here supposed it, for the sake of simplifying the explanation—that the calculating part of the mechanism should have its action suspended while the printing part is in operation, or vice versa; it is not intended, in fact, to be so suspended in the actual machinery. The same turn of the axis by which one number is printed, executes a part of the movements necessary for the succeeding calculation; so that the whole mechanism will be simultaneously and continuously in action.

Of the mechanism by which the position of the copper is shifted from figure to figure, from line to line, we shall not attempt any description. We feel that it would be quite vain. Complicated and difficult to describe as every other part of this machinery is, the mechanism for moving the copper is such as it would be quite impossible to render at all intelligible, without numerous illustrative drawings.

The engraved plate of copper obtained in the manner above described, is designed to be used as a mould from which a stereotyped plate may be cast; or, if deemed advisable, it may be used as the immediate means of printing. In the one case we should produce a table, printed from type, in the same manner as common letter-press printing; in the other an engraved table. If it be thought most advisable to print from the stereotyped plates, then as many stereotyped plates as may be required may be taken from the copper mould; so that when once a table has been calculated and engraved by the machinery, the whole world may be supplied with stereotyped plates to print it, and may continue to be so supplied for an unlimited period of time. There is no practical limit to the number of stereotyped plates which may be taken from the engraved copper; and there is scarcely any limit to the number of printed copies which may be taken from any single stereotyped plate. Not only, therefore, is the numerical table by these means engraved and stereotyped with infallible accuracy, but such stereotyped plates are producible in unbounded quantity. Each plate, when produced, becomes itself the means of producing printed copies of the table, in accuracy perfect, and in number without limit.