Page:Edinburgh Review Volume 59.djvu/309

1834. by which the adding process, apart from the carriages, is effected. During the first quarter of a turn, the bolts which drive the dials in the first, third, and fifth rows, are caused to revolve, and to act upon these dials, so long as they are permitted by the position of the several wedges on the second, fourth, and sixth rows of dials, by which these bolts are respectively withdrawn; and, during the third quarter of a turn, the bolts which drive the dials of the second and fourth rows are made to revolve and act upon these dials so long as the wedges on the dials of the third and fifth rows, which withdraw them, permit. It will hence be perceived, that, during the first and third quarters of a turn, the process of addition is continually passing upwards through the machinery; alternately from the even to the odd rows, and from the odd to the even rows, counting downwards.

We shall now attempt to convey some notion of the mechanism by which the process of carrying is effected during the second and fourth quarters of a turn of the axis. As before, we shall first explain it in reference to a particular instance. During the first quarter of a turn the wheel B2, Fig. 1, is caused by the adding bolt to move through five divisions; and the fifth of these divisions, which passes under the index, is that between 9 and 0. On the axis of the wheel C2, immediately to the left of B2, is fixed a wheel, called in mechanics a ratchet wheel, which is driven by a claw which constantly rests in its teeth. This claw is in such a position as to permit the wheel C2 to move in obedience to the action of the adding bolt, but to resist its motion in the contrary direction. It is drawn back by a spiral spring, but its recoil is prevented by a hook which sustains it; which hook, however, is capable of being withdrawn, and when withdrawn, the aforesaid spiral spring would draw back the claw, and make it fall through one tooth of the ratchet wheel. Now, at the moment that the division between 9 and 0 on the dial B2 passes under the index, a thumb placed on the axis of this dial touches a trigger which raises out of the notch the hook which sustains the claw just mentioned, and allows it to fall back by the recoil of the spring, and to drop into the next tooth of the ratchet wheel. This process, however, produces no immediate effect upon the position of the wheel C2, and is merely preparatory to an action intended to take place during the second quarter of a turn of the moving axis. It is in effect a memorandum taken by the machine of a carriage to be made in the next quarter of a turn.

During the second quarter of a turn, a finger placed on the axis of the dial B2 is made to revolve, and it encounters the heel of the above-mentioned claw. As it moves forward it drives the claw before it: and this claw, resting in the teeth of the