Page:Edinburgh Review Volume 59.djvu/303

1834. ; and after these additions have been made, to conceive all the requisite carriages to be also made by advancing the proper dials one division forward. This would suppose all the dials in the scheme to receive their adding motion together; and, this being accomplished, the requisite dials to receive their carrying motions together. The production of so great a number of simultaneous motions throughout any machinery, would be attended with great mechanical difficulties, if indeed it be practicable. In the calculating machinery it is not attempted. The additions are performed in two successive periods of time, and the carriages in two other periods of time, in the following manner. We shall suppose one complete revolution of the axis which moves the machinery, to make one complete set of additions and carriages; it will then make them in the following order:—

The first quarter of a turn of the axis will add the second, fourth, and sixth rows to the first, third, and fifth, omitting the carriages; this it will do by causing the dials on the first, third, and fifth rows, to turn through as many divisions as are expressed by the numbers at the indices below them, as already explained.

The second quarter of a turn will cause the carriages consequent on the previous addition, to be made by moving forward the proper dials one division.

(During these two quarters of a turn, the dials of the first, third, and fifth row alone have been moved; those of the second, fourth, and sixth, have been quiescent.)

The third quarter of a turn will produce the addition of the third and fifth rows to the second and fourth, omitting the carriages; which it will do by causing the dials of the second and fourth rows to turn through as many divisions as are expressed by the numbers at the indices immediately below them.

The fourth and last quarter of a turn will cause the carriages consequent on the previous addition, to be made by moving the proper dials forward one division.

This evidently completes one calculation, since all the rows except the first have been respectively added to all the rows except the last.

To illustrate this: let us suppose the table to be computed to be that of the fifth powers of the natural numbers, and the computation to have already proceeded so far as the fifth power of 6, which is 7776. This number appears, accordingly, in the highest row, being the place appropriated to the number of the table to be calculated. The several differences as far as the fifth, which is in this case constant, are exhibited on the successive rows of dials in such a manner, as to be adapted to the process of addition by alternate rows, in the manner already explained. The process of addition will commence by the motion of the dials in the first, third, and fifth rows, in the following manner: The dial A, fig. 1,