Page:Economic History of Virginia Vol 2.djvu/437

 of Henrico was presented in court in 1679. It reveals the fact that his tools were at the time of his death lying at four different places in the county. It will be interesting to enumerate them. At Mr. Cox&#8217;s, there were one jack-plane, one smoothing plane, and four small plough planes, two files, two bramble bits, one keyhole saw, a quarter-inch and a one and a half inch gouge, a half-inch and a quarter-inch short auger, a one-half inch and one-quarter inch heading chisel, two mortising chisels, one gimlet, one pair of compasses, one pair of piercers, two hand-irons for a turning lathe, a chalk line, two wooden gauges one-half foot square, and one tool chest.

At Mr. Radford&#8217;s, there were one hand-saw, a pocket-roll, a jack and line, one two-inch and one half-inch auger, two smoothing and eight small narrow planes, one hold-fast, one hammer, a bench hook, four small pincer bits, a file for a hand-saw, one inch and one half-inch heading chisel, a broad turning chisel, one paring and one half-inch ordinary chisel, two gimlets, a quarter-inch gouge, and a small pincer bit, two small squares, one gauge, one bow-saw, and one pair of compasses.

At Falling Creek Mill, there were two broad axes, three adzes, four augers, three chisels, one whip and three hand-saws, one foreplane, two hammers, one pair of compasses, one chalk line, and two files. At Mr. John Hudlesy&#8217;s, there were two chisels and one small jack-plane.

In a general way, it may be said, that the equipment of the carpenter for his trade comprised hand, cross-cut, and bramble saws, half-inch augers, auger bits, chisels, claw-hammers, files, narrow and broad axes, adzes, hatchets, wedges, smoothing planes, rabbit planes, foreplanes, creasing and half-inch round planes, parting and turning gouges, and nail-boxes. Leather doublets doubtless formed a part