Page:EB1911 - Volume 24.djvu/988

Rh investigated by Bouguer in his Traité du Navire. The points M′M″, on the curve are now termed pro-metacentres.

If represent the length of the normal B′M′ or the radius of curvature of the curve of buoyancy at an angle, then .𝑑 = 𝑑𝑠 the length of an element of arc of the B curve. In the limit when d is indefinitely small, $𝑑𝑠⁄𝑑$=. Using Cartesian co-ordinates with B as origin and B𝑦, B𝑧, as horizontal and vertical axes, we have—

whence

$y = \int_0^{\theta} \rho.\cos \theta.d\theta ; z= \int_0^{\theta} \rho.\sin \theta.d\theta,$

and the righting lever GZ ＝𝑦 cos +(𝑧−BG) sin.

The radius is (as for the upright position) equal to the moment of inertia of the corresponding water-plane about a longitudinal axis through its centre of gravity divided by the volume of displacement; the integration may be directly performed in the case of bodies of simple geometrical form, while a convenient method of approximation such as Simpson’s Rules is employed with vessels of the usual ship-shaped type. As an example in the case of a box, or a ship with upright sides in the neighbourhood of the water-line, if BG=𝑎 and BM =0, then =0 sec3; whence

𝑦＝$\int_0^{\theta}$ cos .𝑑＝0 tan ,

𝑧＝$\int_0^{\theta}$ sin .𝑑＝0 tan2 ,

and

GZ＝(0−𝑎) sin 0+0 tan2 .sin ;

which relations will also hold for a prismatic vessel of parabolic section. It is interesting to note that in these cases if the stability for infinitely small inclinations is neutral, i.e. if p0=a, the vessel is stable for small finite inclinations, the righting lever varying approximately as the cube of the angle of heel.

The application of the preceding formulae to actual ships is troublesome and laborious on account of the necessity for finding by trial the positions of the inclined water-lines which cut off a constant volume of displacement. To avoid this difficulty the process was modified by Reech and Risbec in the following manner z-Multiply equations (1) and (2) by V.d, V being the volume of displacement; we then have—

where I is the moment of inertia of the inclined water-line about a longitudinal axis passing through its centre of gravity. These formulae have been obtained on the supposition that the volume V is constant while is varying; but by regarding the above equations as representing the moments of transference horizontally and vertically due to the wedges, it is evident that V may be allowed to vary in any manner provided that the moment of inertia I is taken about the longitudinal axis passing through the intersection of consecutive water-lines. In particular the water-lines may all be drawn through the point of intersection of the upright water-line with the middle line, and the moments of inertia are then equal to ∫𝑟3𝑑𝑥 for both sides of the ship, 𝑟 being the half-breadth along the inclined water-line; the increase in volume is the difference between the quantity ∫𝑑∫𝑟2𝑑𝑥 for the two sides of the ship.

If Vundefined, V0 be the volumes of displacement at angles and  respectively,

and substituting in (3) and (4) and integrating

On eliminating Vundefined in (5), (6) and (7), 𝑦 and 𝑧 can be found.

This is repeated at different draughts, and thus Vundefined, 𝑦 and 𝑧 are determined at a number of draughts at the same angle, enabling curves of 𝑦 and 𝑧 to be drawn at various constant angles with V for an abscissa; from these, curves may be obtained for 𝑦 and 𝑧 with the angle as abscissa for various constant displacements; GZ being equal to

𝑦 cos +(𝑧−𝑎) sin.

From the foregoing it is evident that the elements of transverse stability, including the co-ordinates of the centre of buoyancy, position

of pro-metacentre, values of righting lever and righting moment. depend on two variable quantities—the displacement and the angle of heel. The righting lever GZ is in England selected the most useful criterion of the stability, and, after being evaluated for the various conditions, is plotted in a form of curves—(a) for various constant displacements on an abscissa of angle of inclination, (b) for a number of constant angles on an abscissa of displacement.

. 9.—Cross Curves of Stability of a Battleship.

These are known as curves of stability and cross curves of stability respectively; either of these can be readily constructed when the other has been obtained; which process is utilized in the method now almost universally adopted for obtaining GZ at large angles of inclination, a full description being given in papers by Merrifield and Amsler in ''Trans. I.N.A.'' (1880 and 1884). The procedure is as follows:

1. The substitution of calculations at constant angle for those at constant volume. A number of water-lines at inclinations having a constant angular interval (generally 15°) are drawn passing through the intersection S′ of the load water-line with the middle line on the body plan. Other water-lines are set off parallel to these at fixed distances above or below the original water-line passing through S′.

2. The volumes of displacement and the moments about an axis through S′ perpendicular to the water-line are determined for each draught and inclination by means of the Amsler-Laffon integrator, the pointer of this instrument being taken in turn round the immersed part of each section.

. 10.—Curves of Stability of a Battleship.

3. On dividing the moments by the corresponding volumes, the perpendicular distance of the centre of buoyancy from the vertical through S′ is obtained, i.e. the value of GZ, assuming G and S′ to coincide.

4. For each angle in turn “cross curves” of GZ are drawn on a base of displacement.