Page:EB1911 - Volume 21.djvu/529

APPARATUS] in front of the viewing and taking lenses. In another form the, finder was omitted. A month later A. Loisseau and J. B. Germeuil-Bonnaud patented an opera glass camera. Various forms of portable magazine cameras followed, among them A. Pumphrey’s “Repeating Camera” (1881), W. Rouch's “Eureka” (1887), R. Krugener's camera (book form, 1888), and others in collapsible or box forms disguised as books, watches, &c., but they did not come into general use before 1888, when the Eastman Company of Rochester, U.S.A., brought out their very portable roll-Elm cameras, now known under the trade name of “Kodak.” The manufacture of these and other light hand cameras has since become a very important and flourishing industry in Great Britain, Germany, France and the United States. It is noteworthy that the most modern form of hand camera, the reflex, goes back to an early type of portable camera obscura, figured by Johann Zahn in 1686, in which a mirror was used for reflecting the image on to a horizontal focusing screen, at the same time reversing it. The first photographic camera on this principle was T. Sutton’s (1860), which has served as a basis or many subsequent developments. A. D. Loman's (1889) and R. Krugener's (1891) were early examples of the hand camera type, but great improvements have since been made.

Modern cameras differ so much in details of improved construction that only a few of the more important requirements can be noticed. A camera should be well and strongly made of seasoned wood or of metal, perfectly rigid when set up, to avoid any shifting of the axis of the lens in respect to the sensitive plate. The front and back of the camera should normally be vertical and parallel, and the axis of the lens perpendicular to the centre of the plate, but arrangements are usually made by vertical and lateral adjustments on the camera front for raising the lens to take in less foreground or vice versa, or for moving it right or left, the latter becoming a vertical movement when the camera has to be turned on its side. In the Adams “Idento” camera the lens and finder can be rotated together on the rising front according as the camera is used horizontally or vertically, the finder showing in either case the identical view projected on the late. The best modern field cameras are fitted with a swing-back; or swing-front and sometimes with both. A swing-back is necessary for bringing back the plate to the vertical position, so as to prevent convergence of vertical lines, when the camera has to be tilted. A rising swing-front, in which the lens is tilted, answers the same purpose, provided the camera is kept level If further tilting is necessary, when taking high buildings &c., the swing-back and front may both be required, but must be kept vertical and parallel and the effect is that of an abnormal rising front. Many modern cameras are fitted with a double rising front The vertical and side swings are also useful for equalizing the definition of objects at different distances from the camera, but they alter the perspective. These swing-movements should refer ably be round the central horizontal or vertical axis of the back or front, but are frequently effected by simple inclination of the back or lens front on a hinge. When the rising front is used a lens of extended covering power is desirable, and it may be necessary to stop it down to obtain good definition over the extended area of the picture. A slight inclination of the lens may also be useful in readjusting the focus. The camera and plate carriers must be perfectly light-tight and all inner bright surfaces made dead black to prevent reflections from bright spots being thrown on the plate. The black varnish used, preferably of shellac and lampblack in spirit, must have no deleterious effect on the plates. Although the weight and bulk are increased it is convenient to have the camera square and fitted with a reversible back, so that the greatest length of the plate may be horizontal or vertical, as desired. Many cameras are fitted with revolving backs to be used in either position. In some French cameras the back part of the camera with the bellows is reversible, to be used upright or horizontal.

Focusing.—The earlier cameras were focused by drawing out the back and clamping it with a thumb-screw working in a slot in the base-board. When bellows cameras were introduced they were focused by an endless screw, and these are still used for large copying cameras. Most modern cameras are fitted with rack and pinion movements working either in front or at the back of the camera or both. Many hand cameras, requiring to be brought to focus at once, are fitted with studs (infinity catches) which fix the front in focus for distant objects, nearer distances being noted on an engraved scale attached to the base-board. Such scales should be verified by measurement. In hand cameras with fixed infinity focus, the necessary adjustments for distance of near objects are made on the lens mount. The focusing screen may be ruled with parallel cross lines for purposes of measurement, and as a check on the verticality of the camera when photographing buildings or other objects with vertical lines The distance of the lens from the focusing screen and from the sensitive plate in the dark slide must coincide exactly. This can be tested by measurement or by focusing a

bright, well-defined object on the screen and then on a ground-glass plate placed in each of the slides to be examined. A level or other means of showing that the camera is level and the plate vertical should be attached to the camera, also a view meter or finder, showing the exact extent of the picture on the focusing glass. In the view meter the picture is viewed directly through a pin-hole mounted at the back of the camera as it appears in a frame with cross wires on the rising front, adjusted to the size of the plate and the focus of the lens. Finders are practically small reflex cameras, and a reduced image is seen reflected from a mirror or prism. A rectangular concave glass mounted on the camera is also a convenient form, it can be combined with a mirror for vertical observation, and in Watson's new form is also arranged as a level and telemeter (B. J. A. p. 724, 1908). The image seen in the finders should correspond exactly with that on the plate. When the rising front is used special arrangements have to be made to ensure the correspondence of the images in the finder and on the ground glass. This is done in the “Adams Identoscope” (1908), which is fitted to the swing front and adjusted by a lever to follow the movement of the lens.

Plate-holders of Dark-slides.—The dark-slides or backs, holding sensitive plates, are made either single or double, the former usually for wet plates, the latter for dry plates. The ordinary book-form double dark-slide has been in use since the early days of calotype paper negatives, and contains two plates separated by a blackened metal plate; three of them usually form a set, the shutters being numbered 1 to 6, the odd numbers on the opening side. Inner frames can be used for smaller plates if desired. The slides should fit easily into the camera and the shutters run smoothly out and in. They must be perfectly light-tight, the corner joints, the hinges in the shutters, anti, the openings in the sides and top of the book-form slides are all weak points requiring occasional careful examination or protection by metal (plates. The shutters of dark-slides are either jointed or solid an removable; the former is perhaps the more convenient, but both forms may become liable to let in light. Various forms of solid slides, single and double, are now made in wood or metal, or of wood for the frame and metal for the shutters; they are lighter, more compact and less liable to admit light to the plates.

. 1.—Premo Film-pack In some cases one slide can suffice for the exposure of several plates or stiff films, enclosed in separate envelopes, as in the “Wishart-Mackenzie” slide, the “Victrix” and other similar ones, or contained in a single packet, as in the “Premo Filmpack,” and similar arrangements which enable twelve thin celluloid films to be placed in the camera, exposed one after the other, and removed again safely in daylight, the pack being replaced, if necessary, by another. The packets of films are made of light cardboard, and effect a great saving of bulk and weight (fig. 1). Roll-holders are also a convenient way of carrying sensitive celluloid films in lengths of six or twelve exposures, rolled on spools, which can be changed in daylight. Changing boxes for holding a reserve of plates or celluloid films in sheaths, are used with some magazine and other cameras. They are arranged to fit on the camera in place of the dark-slide and the plates are changed automatically so that exposed plates are placed in order successively at the back, a fresh plate going forward for exposure and the number of the exposure being recorded at the same time.

Studio cameras, for portraiture, are usually of the square bellows type, of solid construction, to take large and heavy lenses; adjustable from front and back with rack and pinion movements, to enable long or short focus lenses to be used, with extra extension for copying or enlarging. They are generally fitted with repeating backs, allowing two or more exposures to be made on one late. The backs are square or reversible, so that the plates can ge used upright or length ways, and are fitted with double swing movements at the back. When single dark slides are used they are best fitted with a Flexible shutter to avoid jerking and movement of the camera. For portraiture they are mounted on solid pillar stands, being raised or lowered with an endless screw or rack-work, and the table-top usually has vertical and horizontal angular movements. Large cameras with long extension for copying purposes are made in many forms with special arrangements for the various photo-mechanical processes, and are mounted on substantial table-stands with screw adjustments for obtaining the various motions above noted, and also a rectilinear traversing motion right or left. All these stands should be absolutely rigid and free from tremor. Process cameras are, however, sometimes mounted, 