Page:EB1911 - Volume 16.djvu/659

OPTICAL APPARATUS] similar manner to an ordinary group-flashing light, the groups of lenses being placed on one side of the optic, while the other is provided with a catadioptric mirror. This system of numerical flashing for lighthouses has been frequently proposed in various forms, notably by Lord Kelvin. The installation of the lights described is, however, the first practical application of the system to large and important coast lights. The great cost involved in the alteration of the lights of any country to comply with the requirements of a numerical system is one of the objections to its general adoption.

Hyper-radial Apparatus.—In 1885 Messrs Barbier of Paris constructed the first hyper-radial apparatus (1330 mm. focal distance) to the design of Messrs D. and C. Stevenson. This had a height of 1812 mm. It was tested during the South Foreland experiments in comparison with other lenses, and found to give excellent results with burners of large focal diameter. Apparatus of similar focal distance (1330 mm.) were subsequently established at Round Island, Bishop Rock, and Spurn Point in England, Fair Isle and Sule Skerry (fig. 40) in Scotland, Bull Rock and Tory Island in Ireland, Cape d’Antifer in France, Pei Yu-shan in China and a lighthouse in Brazil.

The light erected in 1907 at Cape Race, Newfoundland, is a fine example of a four-sided hyper-radial apparatus mounted on a mercury float. The total weight of the revolving part of the light amounts to 7 tons, while the motive clock weight required to rotate this large mass at a speed of two complete revolutions a minute is only 8 cwt. and the weight of mercury required for flotation 950 ℔. A similar apparatus was placed at Manora Point, Karachi, India, in 1908 (fig. 41).

The introduction of incandescent and other burners of focal compactness and high intensity has rendered the use of optics of such large dimensions as the above, intended for burners of great focal diameter, unnecessary. It is now possible to obtain with a second-order optic (or one of 700 mm. focal distance), having a powerful incandescent petroleum burner in focus, a beam of equal intensity to that which would be obtained from the apparatus having a 10-wick oil burner or 108-jet gas burner at its focus.

Stephenson’s Spherical Lenses and Equiangular Prisms.—Mr C. A. Stephenson in 1888 designed a form of lens spherical in the horizontal and vertical sections. This admitted of the construction of lenses of long focal distance without the otherwise corresponding necessity of increased diameter of lantern. A lens of this type and of 1330 mm. focal distance was constructed in 1890 for Fair Isle lighthouse. The spherical form loses in efficiency if carried beyond an angle subtending 20° at the focus, and to obviate this loss Mr Stephenson designed his equiangular prisms, which have an inclination outwards. It is claimed by the designer that the use of equiangular prisms results in less loss of light and less divergence than is the case when either the spherical or Fresnel form is adopted. An example of this design is seen (fig. 40) in the Sule Skerry apparatus (1895).

Fixed and Flashing Lights.—The use of these lights, which show a fixed beam varied at intervals by more powerful flashes, is not to be recommended, though a large number were constructed in the earlier years of dioptric illumination and many are still in existence. The distinction can be produced in one or other of three ways: (a) by the revolution of detached panels of straight condensing lens prisms placed vertically around a fixed light optic, (b) by utilizing revolving lens panels in the middle portion of the optic to produce the flashing light, the upper and lower sections of the apparatus being fixed zones of catadioptric or reflecting elements emitting a fixed belt of light, and (c) by interposing panels of fixed light section between the flashing light panels of a revolving apparatus. In certain conditions of the atmosphere it is possible for the fixed light of low power to be entirely obscured while the flashes are visible, thus vitiating the true characteristic of the light. Cases have frequently occurred of such lights being mistaken for, and even described in lists of light as, revolving or flashing lights.

”Cute” and Screens.—Screens of coloured glass, intended to distinguish the light in particular azimuths, and of sheet iron, when it is desired to “cut off” the light sharply on any angle, should be fixed as far from the centre of the light as possible in order to reduce the escape of light rays due to divergence. These screens are usually attached to the lantern framing.

Divergence.—A dioptric apparatus designed to bend all incident rays of light from the light source in a horizontal direction would, if the flame could be a point, have the effect of projecting a horizontal band or zone of light, in the case of a fixed apparatus, and a cylinder of light rays, in the case of a flashing light, towards the horizon. Thus the mariner in the near distance would receive no light, the rays, visible only at or near the horizon, passing above the level of his eye. In practice this does not occur, sufficient natural divergence being produced ordinarily owing to the magnitude of the flame. Where the electric arc is employed it is often necessary to design the prisms so as to produce artificial divergence. The measure of the natural divergence for any point of the lens is the angle whose sine is the ratio of the diameter of the flame to the distance of the point from centre of flame.

In the case of vertical divergence the mean height of the flame must be substituted for the diameter. The angle thus obtained is the total divergence, that is, the sum of the angles above and below the horizontal plane or to right and left of the medial section. In fixed dioptric lights there is, of course, no divergence in the horizontal plane. In flashing lights the horizontal divergence is a matter of considerable importance, determining as it does the duration or length of time the flash is visible to the mariner.

Feux-Éclairs or Quick Flashing Lights.—One of the most important developments in the character of lighthouse illuminating apparatus that has occurred in recent years has been in the direction of reducing the length of flash. The initiative in this matter was taken by the French lighthouse authorities, and in France alone forty lights of this type were established between 1892 and 1901. The use of short flash lights rapidly spread to other parts of the world. In England the lighthouse at Pendeen (1900) exhibits a quadruple flash every 15 seconds, the flashes being about second duration (fig. 39), while the bivalve apparatus erected on Lundy Island (1897) shows 2 flashes of second duration in quick succession every 20 seconds. Since 1900 many quick flashing lights have been erected on the coasts of the United Kingdom and in other countries. The early feux-éclairs, designed by the French engineers and others, had usually a flash of th to rd of a second duration. As a result of experiments carried out in France in 1903–1904, second has been adopted by the French authorities as the minimum duration for white flashing lights. If shorter flashes are used it is found that the reduction in duration is attended by a corresponding, but not proportionate, diminution in effective intensity. In the case of many electric flashing lights the duration is of necessity reduced, but the greater initial intensity of the flash permits this loss without serious detriment to efficiency. Red or green requires a considerably greater duration than do white flashes. The intervals between the flashes in lights of this character are also small, 2 seconds to 7 seconds. In group-flashing lights the intervals between the flashes are about 2 seconds or even less, with periods of 7 to 10 or 15 seconds between the groups. The flashes are arranged in single, double, triple or even quadruple groups, as in the older forms of apparatus. The feu-éclair type of apparatus enables a far higher intensity of flash to be obtained than was previously possible without any corresponding increase in the luminous power of the burner or other source of light. This result depends entirely upon the greater ratio of condensation of light employed, panels of greater angular breadth than was customary in the older forms of apparatus being used with a higher rotatory velocity. It has been urged that short flashes are insufficient for taking bearings, but the utility of a light in this respect does not seem to depend so much upon the actual length of the flash as upon its frequent recurrence at short intervals. At the Paris Exhibition of 1900 was exhibited a fifth-order flashing light giving short flashes at 1 second intervals; this represents the extreme to which the movement towards the reduction of the period of flashing lights has yet been carried.

Mercury Floats.—It has naturally been found impracticable to revolve the optical apparatus of a light with its mountings, sometimes weighing over 7 tons, at the high rate of speed required for feux-éclairs by means of the old system of roller carriages, though for some small quick-revolving lights ball bearings have been successfully adopted. It has therefore become almost the universal practice to carry the rotating portions of the apparatus upon a mercury float. This beautiful application of mercury rotation was the invention of Bourdelles, and is now utilized not only for the high-speed apparatus, but also generally for the few examples of the older type still being constructed. The arrangement consists of an annular cast iron bath or trough of such dimensions that a similar but slightly smaller annular float immersed in the bath and surrounded by mercury displaces a volume of the liquid metal whose weight is equal to that of the apparatus supported. Thus a comparatively insignificant quantity of mercury, say 2 cwt., serves to ensure the flotation of a mass of over 3 tons. Certain differences exist between the type of float usually constructed in France and those generally designed by English engineers. In all cases provision is made for lowering the mercury bath or raising the float and apparatus for examination. Examples of mercury floats are shown in figs. 41, 42, 43 and Plate I., figs. 54 and 55.