Page:EB1911 - Volume 16.djvu/654

Rh of a zone of glass generated by the revolution round a vertical axis of a medial section of the annular lens (fig. 33). The lens belt condensed and parallelized the light rays in the vertical plane only, while the annular lens does so in every plane. The first revolving light constructed from Fresnel’s designs was erected at the Cordouan lighthouse in 1823. It consisted of 8 panels of annular lenses placed round the lamp at a focal distance of 920 mm.

To utilize the light, which would otherwise escape above the lenses, Fresnel introduced a series of 8 plain silvered mirrors, on which the light was thrown by a system of lenses. At a subsequent period mirrors were also placed in the lower part of the optic. The apparatus was revolved by clockwork. This optic embodied the first combination of dioptric and catoptric elements in one design (fig. 34). In the following year Fresnel designed a dioptric lens with catoptric mirrors for fixed light, which was the first of its kind installed in a lighthouse. It was erected at the Chassiron lighthouse in 1827 (fig. 35). This combination is geometrically perfect, but not so practically on account of the great loss of light entailed by metallic reflection which is at least 25% greater than the system described under. Before his death in 1827 Fresnel devised his totally reflecting or catadioptric prisms to take the place of the silvered reflectors previously used above and below the lens elements (fig. 28). The ray Fi falling on the prismoidal ring ABC is refracted in the direction i r and meeting the face AB at an angle of incidence greater than the critical, is totally reflected in the direction r e emerging after second refraction in a horizontal direction. Fresnel devised these prisms for use in fixed light apparatus, but the principle was, at a later date, also applied to flashing lights, in the first instance by T. Stevenson. Both the dioptric lens and catadioptric prism invented by Fresnel are still in general use, the mathematical calculations of the great French designer still forming the basis upon which lighthouse opticians work.

Fresnel also designed a form of fixed and flashing light in which the distinction of a fixed light, varied by flashes, was produced by placing panels of straight refracting prisms in a vertical position on a revolving carriage outside the fixed light apparatus. The revolution of the upright prisms periodically increased the power of the beam, by condensation of the rays emergent from the fixed apparatus, in the horizontal plane.

The lens segments in Fresnel’s early apparatus were of polygonal form instead of cylindrical, but subsequently manufacturers succeeded in grinding glass in cylindrical rings of the form now used. The first apparatus of this description was made by Messrs Cookson of Newcastle in 1836 at the suggestion of Alan Stevenson and erected at Inchkeith.

In 1825 the French Commission des Phares decided upon the exclusive use of lenticular apparatus in its service. The Scottish Lighthouse Board followed with the Inchkeith revolving apparatus in 1835 and the Isle of May fixed optic in 1836. In the latter instrument Alan Stevenson introduced helical frames for holding the glass prisms in place, thus avoiding complete obstruction of the light rays in any azimuth. The first dioptric light erected by the Trinity House was that formerly at Start Point in Devonshire, constructed in 1836. Catadioptric or reflecting prisms for revolving lights were not used until 1850, when Alan Stevenson designed them for the North Ronaldshay lighthouse.