Page:EB1911 - Volume 16.djvu/356

Rh lime out with it, but involves a great and undesirable loss of hide substance, heavy leather being sold by weight. This difficulty is now got over by giving the goods an acid bath first, to delime the surface; the acid fixes this soluble hide substance (which is only soluble in alkalies) and hardens it, thus preventing its loss, and the goods may then be scudded clean with safety. The surface of all heavy leathers must be delimed to obtain a good coloured leather, the demand of the present day boot manufacturer; it is also necessary to carry this further with milder leathers than sole, such as harness and belly, &c., as excess of lime causes the leather to crack when finished. Perhaps the best material for this purpose is boracic acid, using about 10 ℔ per 100 butts, and suspending the goods. This acid yields a characteristic fine grain, and because of its limited solubility cannot be used in excess. Other acids are also used, such as acetic, lactic, formic, hydrochloric, with varying success. Where the water used is very soft, it is only necessary to wash in water for a few hours, when the butts are ready for tanning, but if the water is hard, the lime is fixed in the hide by the bicarbonates it contains, in the form of carbonate, and the result is somewhat disastrous.

After deliming, the butts are scudded, rinsed through water or weak acid, and go off to the tan pits for tanning proper. Any lime which remains is sufficiently removed by the acidity of the early tan liquors. The actual tanning now begins, and the operations involved may be divided into a series of three: (1) colouring, (2) handling, (3) laying away.

The colouring pits or “suspenders,” perhaps a series of eight pits, consist of liquors ranging from 16° to 40° barkometer, which were once the strongest liquors in the yard, but have gradually worked down, having had some hundreds of hides through them; they now contain very little tannin, and consist mainly of developed acids which neutralize the lime, plump the hide, colour it off, and generally prepare it to receive stronger liquors. The goods are suspended in these pits on poles, which are lifted up and down several times a day to ensure the goods taking an even colour; they are moved one pit forward each day into slightly stronger liquors, and take about from 7 to 18 days to get through the suspender stage.

The reason why the goods are suspended at this stage instead of being laid flat is that if the latter course were adopted, the hides would sink and touch one another, and the touch-marks, not being accessible to the tan liquor, would not colour, and uneven colouring would thus result; in addition the weight of the top hides would flatten the lower ones and prevent their plumping, and this condition would be exceedingly difficult to remedy in the after liquors. Another question which might occur to the non-technical reader is, why should not the process be hastened by placing the goods in strong liquors? The reason is simple. Strong tanning solutions have the effect of “drawing the grain” of pelt, i.e. contracting the fibres, and causing the leather to assume a very wrinkled appearance which cannot afterwards be remedied; at the same time “case tanning” results, i.e. the outside only gets tanned, leaving the centre still raw hide, and once the outside is case-hardened it is impossible for the liquor to penetrate and finish the tanning. This condition being almost irremediable, the leather would thus be rendered useless.

After the “suspenders” the goods are transferred to a series of “handlers” or “floaters,” consisting of, perhaps, a dozen pits containing liquors ranging from 30° to 55° barkometer. These liquors contain an appreciable quantity of both tannin and acid, once formed the “lay-aways,” and are destined to constitute the “suspenders.” In these pits the goods, having been evenly coloured off, are laid flat, handled every day in the “hinder” (weaker) liquors and shifted forward, perhaps every two days, at the tanner’s convenience. The “handling” consists of lifting the butts out of the pit by means of a tanner’s hook (fig. 6), piling them on the side of the pit to drain, and returning them to the pit, the top butt inthe one handler being returned as the bottom in the next. This operation is continued throughout the process, only, as the hides advance, the necessity for frequent handling decreases. The top two handler pits are sometimes converted into “dusters,” i.e. when the hides have advanced to these pits, as each butt is lowered, a small quantity of tanning material is sprinkled on it.

Some tanners, now that the hides are set flat, put them in suspension again before laying away; the method has its advantages, but is not general. The goods are generally laid away immediately. The layer liquors consist of leached liquors from the fishings, strengthened with either chestnut or oakwood extract, or a mixture of the two. The first layer is made up to, say, 60° barkometer in this way, and as the hides are laid down they are sprinkled with fresh tanning material, and remain undisturbed for about one week. The second layer is a 70° barkometer liquor, the hides are again sprinkled and allowed to lie for perhaps two weeks. The third may be 80° barkometer and the fourth 90°, the goods being “dusted” as before, and lying undisturbed for perhaps three or four weeks respectively. Some tanners give more layers, and some give less, some more or less time, or greater or lesser strengths of liquor, but this tannage is a typical modern one.

As regards “dusting” material, for mellow leather, mellow materials are required, such as myrobalans being the mellowest and mimosa bark the most astringent of those used in this connexion. For harder leather, as sole leather, a much smaller quantity of myrobalans is used, if any at all, a fair quantity of mimosa bark as a medium, and much valonia, which deposits a large amount of bloom, and is of great astringency. About 3 to 4 cwt. of a judicious mixture is used for each pit, the mellower material predominating in the earlier liquors and the most astringent in the later liquors.

The tanning is now finished, and the goods are handled out of the pits, brushed free from dusting material, washed up in weak liquor, piled and allowed to drip for 2 or 3 days so that the tan may become set.

Finishing.—From this stage the treatment of sole leather differs from that of harness, belting and mellower leathers. As regards the first, it will be found on looking at the dripping pile of leather that each butt is covered with a fawn-coloured deposit, known technically as “bloom”; this disguises the under colour of the leather, just like a coat of paint. The theory of the formation of this bloom is this. Strong solutions of tannin, such as are formed between the hides from dusting materials, are not able to exist for long without decomposition, and consequently the tannin begins to condense, and forms other acids and insoluble anhydrides; this insoluble matter separates in and on the leather, giving weight, firmness, and rendering the leather waterproof. It is known technically as bloom and chemically as ellagic acid.

After dripping, the goods are scoured free from surface bloom in a Wilson scouring machine, and are then ready for bleaching. There are several methods by which this is effected, or, more correctly several materials or mixtures are used, the method of application being the same, viz. the goods are “vatted” (steeped) for some hours in the bleaching mixture at a temperature of 110° F. The mixture may consist of either sumach and a light-coloured chestnut extract made to 110° barkometer, and 110° F., or some bleaching extract made for the purpose, consisting of bisulphited liquid quebracho, which bleaches by reason of the free sulphurous acid it