Page:EB1911 - Volume 12.djvu/121

 nearest approach to an exception to this rule is a fragment at the Victoria and Albert Museum, in which actual tesserae are fused together into a solid slab of many-coloured glass, in effect a window panel, through which the light shines with all the brilliancy of an Early Gothic window. But apart from the fact that the design proves in this case to be even more effective with the light upon it, the use of gold leaf in the tesserae confirms the presumption that this work, which (supposing it to be genuine) would be Byzantine, centuries earlier than any coloured windows that we know of, and entirely different from them in technique, is rather a specimen of fused mosaic that happens to be translucent than part of a window designedly executed in tesserae.

The Eastern (and possibly the earlier) practice was to set chips of coloured glass in a heavy fretwork of stone or to imbed them in plaster. In a medieval window they were held together by strips of lead, in section something like the letter H, the upright strokes of which represent the “tapes” extending on either side well over the edges of the glass, and the crossbar the connecting “core” between them. The leading was soldered together at the points of junction, cement or putty was rubbed into the crevices between glass and lead, and the window was attached (by means of copper wires soldered on to the leads) to iron saddle-bars let into the masonry.

Stained glass was primarily the art of the glazier; but the painter, called in to help, asserted himself more and more, and eventually took it almost entirely into his own hands. Between the period when it was glazier’s work eked out by painting and when it was painter’s work with the aid of the glazier lies the entire development of stained and painted window-making. With the eventual endeavour of the glass painter to do without the glazier, and to get the colour by painting in translucent enamel upon colourless glass, we have the beginning of a form of art no longer monumental and comparatively trivial.

This evolution of the painted window from a patchwork of little pieces of coloured glass explains itself when it is remembered that coloured glass was originally not made in the big sheets produced nowadays, but at first in jewels to look as much as possible like rubies, sapphires, emeralds and other precious stones, and afterwards in rounds and sheets of small dimensions. Though some of the earliest windows were in the form of pure glazing (“leaded-lights”), the addition of painting seems to have been customary from the very first. It was a means of rendering detail not to be got in lead. Glazing affords by itself scope for beautiful pattern work; but the old glaziers never carried their art as far as they might have done in the direction of ornament; their aim was always in the direction of picture; the idea was to make windows serve the purpose of coloured story books. That was beyond the art of the glazier. It was easy enough to represent the drapery of a saint by red glass, the ground on which he stood by green, the sky above by blue, his crown by yellow, the scroll in his hand by white, and his flesh by brownish pink; but when it came to showing the folds of red drapery, blades of green grass, details of goldsmith’s work, lettering on the scroll, the features of the face—the only possible way of doing it was by painting. The use of paint was confined at first to an opaque brown, used, not as colour, but only as a means of stopping out light, and in that way defining comparatively delicate details within the lead lines. These themselves outlined and defined the main forms of the design. The pigment used by the glass painter was of course vitreous: it consisted of powdered glass and sundry metallic oxides (copper, iron, manganese, &c.), so that, when the pieces of painted glass were made red hot in the kiln, the powdered glass became fused to the surface, and with it the dense colouring matter also. When the pieces of painted glass were afterwards glazed together and seen against the light, the design appeared in the brilliant colour of the glass, its forms drawn in the uniform black into which, at a little distance, leadwork and painting lines became merged.

It needed solid painting to stop out the light entirely: thin paint only obscured it. And, even in early glass, thin paint was used, whether to subdue crude colour or to indicate what little shading a 13th-century draughtsman might desire. In the present state of old glass, the surface often quite disintegrated, it is difficult to determine to what extent thin paint was used for either purpose. There must always have been the temptation to make tint do instead of solid lines; but the more workmanlike practice, and the usual one, was to get difference of tint, as a pen-draughtsman does, by lines of solid opaque colour. In comparatively colourless glass (grisaille) the pattern was often made to stand out by cross-hatching the background; and another common practice was to coat the glass with paint all over, and scrape the design out of it. The effect of either proceeding was to lower the tone of the glass without dirtying the colour, as a smear of thin paint would do.

Towards the 14th century, when Gothic design took a more naturalistic direction, the desire to get something like modelling made it necessary to carry painting farther, and they got rid to some extent of the ill effect of shading-colour smeared on the glass by stippling it. This not only softened the tint and allowed of gradation according to the amount of stippling, but let some light through, where the bristles of the stippling-tool took up the pigment. Shading of this kind enforced by touches of strong brushwork, cross-hatching and some scratching out of high lights was the method of glass painting adopted in the 14th century.

Glass was never at the best a pleasant surface to paint on; and glass painting, following the line of least resistance, developed in the later Gothic and early Renaissance periods into something unlike any other form of painting. The outlines continued to be traced upon the glass and fixed in the fire; but, after that, the process of painting consisted mainly in the removal of paint. The entire surface of the glass was coated with an even “matt” of pale brown; this was allowed to dry; and then the high lights were rubbed off, and the modelling was got by scrubbing away the paint with a dry hog-hair brush, more or less, according to the gradations required. Perfect modelling was got by repeating the operation—how often depended upon the dexterity of the painter. A painter’s method is partly the outcome of his individuality. One man would float on his colour and manipulate it to some extent in the moist state; another would work entirely upon the dry matt. Great use was made of the pointed stick with which sharp lines of light were easily scraped out; and in the 16th century Swiss glass painters, working upon a relatively small scale, got their modelling entirely with a needle-point, scraping away the paint just as an etcher scratches away the varnish from his etching plate. The practice of the two craftsmen is, indeed, identical, though the one scratches out what are to be black lines and the other lines of light. In the end, then, though a painter would always use touches of the brush to get crisp lines of dark, the manipulation of glass painting consisted more in erasing lights than in painting shadows, more in rubbing out or scraping off paint than in putting it on in brush strokes.

So far there was no thought of getting colour by means of paint. The colour was in the glass itself, permeating the mass (“pot-metal”). There was only one exception to this—ruby glass, the colour of which was so dense that red glass thick enough for its purpose would have been practically obscure; and so they made a colourless pot-metal coated on one side only with red glass. This led to a practice which forms an exception to the rule that in “pot-metal” glass every change of colour, or from colour to white, is got by the use of a separate piece of glass. It was possible in the ease of this “flashed” ruby to grind away portions of the surface and thus obtain white on red or red on white. Eventually they made coated glass of blue and other colours, with a view to producing similar effects by abrasion. (The same result is arrived at nowadays by means of etching. The skin of coloured glass, in old days laboriously ground or cut away, is now easily eaten off by fluoric acid.) One other exceptional expedient in colouring had very considerable effect upon the development of glass design from about the beginning of the 14th century. The discovery that a solution of silver applied to glass would under the action of the