Page:EB1911 - Volume 07.djvu/775

Rh 2. Where milk is exposed under conditions that would enable a pellicle or membrane to form on the surface, the tubercle organism is able to resist the action of heat at 140° F. (60° C.) for considerably longer periods of time.

3. Efficient pasteurization can be more readily accomplished in a closed receptacle such as is most frequently used in the commercial treatment of milk, than where the milk is heated in open bottles or open vats.

4. It is recommended, in order thoroughly to pasteurize milk so as to destroy any tubercle bacilli which it may contain, without in any way injuring its creaming properties or consistency, to heat the same in closed pasteurizers for a period of not less than twenty minutes at 140° F.

Under these conditions one may be certain that disease bacteria such as the tubercle bacillus will be destroyed without the milk or cream being injured in any way. For over a year this new standard has been in constant use in the Wisconsin University Creamery, and the results, from a purely practical point of view, reported a year earlier by Farrington and Russell, have been abundantly confirmed.

Dairy engineers have solved the problem as to how large bodies of milk may be pasteurized, the difficulty of raising many hundreds or thousands of gallons of milk up to the required temperature, and maintaining it at that heat for a period of twenty minutes, having been successfully dealt with. The plant usually employed provides for the thorough filtration of the milk as it comes in from the farms, its rapid heating in a closed receiver and under mechanical agitation up to the desired temperature, its maintenance thereat for the requisite time, and finally its sudden reduction to the temperature of cold water through the agency of a refrigerator, to be next noticed.

Refrigerators are used for reducing the temperature of milk to that of cold water, whereby its keeping properties are enhanced. The milk flows down the outside of the metal refrigerator (fig. 20), which is corrugated in order to provide a larger cooling surface, whilst cold water circulates through the interior of the refrigerator. The conical vessel into which the milk is represented as flowing from the refrigerator in fig. 20 is absurdly called a “milk-churn,” whereas milk-can is a much more appropriate name. For very large quantities of milk, such as flow from a pasteurizing plant, cylindrical refrigerators (fig. 21), made of tinned copper, are available; the cold water circulates inside, and the milk, flowing down the outside in a very thin sheet, is rapidly cooled from a temperature of 140° F. or higher to 1° above the temperature of the water.

The fat test for milk was originally devised by Dr S. M. Babcock, of the Wisconsin, U.S.A., experiment station. It combines the principle of centrifugal force with simple chemical action. Besides the machine itself and its graduated glass vessels, the only requirements are sulphuric acid of standard strength and warm water. The machines—often termed butyrometers—are commonly made to hold from two up to two dozen testers. After the tubes or testers have been charged, they are put in the apparatus, which is rapidly rotated as shown (fig. 22); in a few minutes the test is complete, and with properly graduated vessels the percentage of fat can be read off at a glance. The butyrometer is extremely useful, alike for measuring periodically the fat-producing capacity of individual cows in a herd, for rapidly ascertaining the percentage of fat in milk delivered to factories and paying for such milk on the basis of quality, and for determining the richness in fat of milk supplied for the urban milk trade. Any intelligent person can soon learn to