Page:Cyclopedia of Painting-Armstrong, George D (1908).djvu/49

Rh lamp black color, or a thin lead color, the object of which is to see the open grain and imperfection so that putty may be used to plaster over and fill them. The surface of the filler must not be rubbed, the paint should be applied as smoothly as possible, for no great amount of sandpapering is to be done. Putty all imperfections after the paint has dried, which will be about 48 hours, for this first coat over the filler should be a little more oily than is necessary in any other coatings.

When the putty is dry, gently rub over with fine sandpaper, but do not cut through the paint. When done, dust off, apply the color and color-and-varnish, as usual, moss down, give a second coat of color-and-varnish, rub this latter with pumice-powder, wash off, stripe, and give a coat of clear elastic leveling varnish, let dry, rub again and finish with elastic gear varnish.