Page:Current Strategies for Engineering Controls in Nanomaterial Production and Downstream Handling Processes.pdf/41

 Engineering controls used included portable vacuums with filters, laboratory fume hoods, portable LEV systems, ventilated walk-in enclosures, negative pressure rooms, and glove boxes. Tasks such as weighing, sonicating, and cleaning reactors showed evidence of nanomaterial emissions. The highest nanoparticle exposures measured occurred inside spray booth-type enclosures and during a spray dryer collection drum change-out. Other activities that resulted in higher exposures include reactor cleanout tasks (e.g., brushing and scraping slag material). Incidental (nonprocess) ultrafines were measured from a variety of sources, including electric arc welding, operating a propane-powered forklift, and the exhaust of a portable vacuum outfitted with filters.

From a review of published studies, some common sources of nanoparticles and fine particles can be identified. As expected, those processes that require material handling resulted in worker exposure to nanomaterials. Other activities that require operator interface with the reactor can result in nanoparticle exposure, and background concentrations may increase as a result of leakage from reactors under positive pressure. In addition, several studies found that evaluation of process emissions and exposure should take into account major sources of incidental nanoparticles that may be present in the workplace and also sources of natural nanoparticles, e.g., tree pollen brought into the work area through the facility HVAC system. Common incidental sources include diesel exhausts in outdoor air, welding fumes, forklifts, and gasfired heaters. Several studies showed that the use of engineering controls can reduce operator exposure, while one study showed that a poorly designed enclosure actually increased exposure [Cena and Peters 2011; Methner et al. 2007; Tsai et al. 2009a, 2010; Yeganeh et al. 2008].

The following sections describe applicable engineering controls for common processes used by nanotechnology companies described in the literature. For each control, a background is given along with a summary of relevant research conducted on their performance. Many of the control concepts discussed in this section come from the HSE Control Guidance Sheets in COSHH Essentials: Easy Steps to Control Chemicals [HSE 2003a,b,c,d] and the ACGIH Industrial Ventilation Manual [ACGIH 2013]. Table 2 lists common processes and tasks, along with potential emission points and the section or figure(s) that address those processes. 26

Current Strategies for Engineering Controls in Nanomaterial Production and Downstream Handling Processes