Page:A complete course in dressmaking, (Vol. 4, Blouses) (IA completecoursein04cono).pdf/65

 yond the lower edge. Also allow seams at the sides.

In cutting out the sleeve pattern, allow seams at all edges.

Finishing Cuffs: In the case of a straight cuff with a narrow turn-back as shown in Fig. 77, the cuff is joined to the lower edge of the sleeve before the sleeve seam is closed.

Join the lining to the turn-back and close the ends. Then slip the turn-back over the cuff and stitch one thickness to cuff. Turn the sleeve wrong side out, turn under the raw edge of the turn-back and stitch, or hand fell it over the raw edges at the bottom of the cuff. (See Fig. 78.)